210661-1X Center Support Bearing For BMC IVECO DAF BENZ FORD

This 210661-1X center support bearing (also known as a carrier bearing or hanger bearing) provides a direct-fit replacement for the driveshaft of select BMC, IVECO, DAF, Mercedes-Benz, and Ford commercial vehicles. It supports the driveshaft at the center point, reduces driveline vibration, and protects universal joints from premature wear. This bearing matches OE specifications including 210661-1X, 210875-1X, 210989-1X, and 212066-1X.

Technical Specifications

Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.

The bore of 1.181 inches (30.00 mm) is the critical fitment spec for this bearing—this determines whether the bearing seats properly on your driveshaft. The centerline-to-centerline mounting hole measurement of 8.622 inches (219.00 mm) determines whether the bracket aligns with your vehicle’s chassis mounting points.

Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.

DH Code & OE Number & Reference Numbers

DH Code:

OE Numbers:
210661-1X, 210875-1X, 210989-1X, 212066-1X, 5003323, 5003326

Reference Numbers (Interchange):
Timken: 210661-1X, HB88512-AHD
Spicer: 210661-1X, 210875-1X, 212066-1X, 5003326
SKF: HB88512-A
National: HB-88512-AHD
Meritor: CB2106611X
NTN: NBHB88512A
BCA: NBHB88512A, HB88512AS
Neapco: N210661-1X

Vehicle Fitment

BMC: Selected models

IVECO: Selected models

DAF: Selected models

MERCEDES-BENZ: Selected models

FORD: F900 (1970–1972, 1992–1999)

FREIGHTLINER: Selected models

Fitment note: This bearing fits select BMC, IVECO, DAF, Mercedes-Benz, Ford, and Freightliner commercial vehicles with a 30mm bearing opening. Please verify OE number, dimensions and vehicle configuration before ordering.

Product Features

• Direct OE replacement. This bearing matches OE specifications including 210661-1X, 210875-1X, and 212066-1X for a wide range of commercial vehicles. [citation:10]
• Pre-greased and pre-sealed bearing. The bearing inserts are pre-greased and pre-sealed with an additional grease barrier between the bearing retainer caps and the sealed bearing to help extend bearing life. [citation:12]
• Heavy-duty bracket. Made from reinforced heavy-gauge cold-rolled steel, the bracket provides strength and durability while the rubber cushion absorbs and isolates driveline vibrations. [citation:12]
• Precision-engineered fitment. Features a 30mm bore, 1810 series, and style 26 configuration for exact vehicle compatibility. [citation:1]
• Driveline support. Supports the driveshaft to ensure stability and reduce vibration during high-speed rotation. [citation:10]
• Universal joint protection. Helps protect the universal joint and extend its service life. [citation:10]

Installation Notes

• Verify fitment. Confirm this bearing matches your original bearing specifications before installation.
• Check your vehicle configuration. This bearing is designed for select BMC, IVECO, DAF, Mercedes-Benz, Ford, and Freightliner commercial vehicles. Verify your specific model and drivetrain before ordering.
• Verify the bore. This bearing is designed for a 30mm (1.181″) bearing opening. If your vehicle has a different size, this part won’t fit.
• Check dimensions. Verify the outside diameter (62mm), width (16mm), and centerline-to-centerline mounting holes (219mm) against your original bearing before installation.
• Professional installation recommended. Proper alignment during installation is critical to prevent premature wear and driveline vibration issues.

About DUHUI Bearing

Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us

For fitment questions, compare your old part number against the OE numbers listed above.