160172RS Wheel Bearing
The DUHUI Bearing 160172RS is a single-row deep groove ball bearing with an 85 mm bore, 130 mm outer diameter, and 16 mm width. This open-type bearing is designed for automotive and industrial applications requiring low friction, high-speed capability, and the ability to accommodate application-specific lubrication systems. It matches OE specification 160172RS and is cross-referenced with SKF, NTN, and NSK equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3547 |
| Part Number | 160172RS |
| Product Type | Deep Groove Ball Bearing – Open, Single Row |
| Bore Diameter (d) | 85.00 mm (3.346 inch) |
| Outer Diameter (D) | 130.00 mm (5.118 inch) |
| Width (B) | 16.00 mm (0.630 inch) |
| Enclosure | Open |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3547
OE Numbers:
160172RS
Reference Numbers (Interchange):
SKF: 160172RS
NTN: 160172RS
NSK: 160172RS
Vehicle Fitment
This bearing is used in various automotive and industrial applications. Please verify OE number and dimensions before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball design accommodates radial loads and moderate axial loads in both directions – suitable for automotive and industrial applications.
- Open-type configuration supports application-specific lubrication – allows for grease or oil systems as per operating conditions.
- Metric configuration with 85 mm bore and 130 mm outer diameter matches OE 160172RS for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways – low friction coefficient and high limiting speed.
- Allows for higher operating speeds with proper lubrication compared to sealed variants.
Installation Notes
- Confirm bore diameter (85.00 mm) and outer diameter (130.00 mm) match your housing and shaft before installation.
- This is an open bearing – apply appropriate lubricant (grease or oil) during installation as recommended by your equipment manual.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Press the bearing squarely into the housing or onto the shaft – never apply force directly through the rolling elements.
- Torque all fasteners to vehicle manufacturer specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
