15007072 Rear Wheel Hub Assembly for CHANGAN CS85
DUHUI Bearing supplies part number 15007072 as a rear wheel hub bearing unit for 2018 Changan CS75 1.5T 2WD and 2019 onward Changan CS85 Coupe 1.5T/2.0T 2WD rear-axle applications. The unit combines a double-row bearing, five wheel-bolt positions with M12 × 1.5 thread, and ABS sensor function in one rear wheel hub assembly.
15007072 Wheel Hub Assembly Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Product Type | Rear wheel hub bearing unit / rear hub assembly |
| Configuration | Double-row wheel hub bearing unit with ABS sensor function |
| Installation Position | Rear axle |
| Wheel Fastening | 5 wheel bolt/stud positions |
| Thread | M12 × 1.5 |
| Set Contents | 1 complete rear wheel hub bearing unit; mounting nuts, snap rings, and other installation accessories are not declared included |
Important notice: Confirm OE number 15007072, rear-axle position, 2WD drive type, ABS connector, five wheel-bolt positions, and M12 × 1.5 thread before ordering. This hub assembly is not for Changan CS75 1.8T 4WD rear applications.
DH Code & OE Reference Numbers
DH Code:
OE Numbers:
Changan: 15007072.
Reference Numbers:
34A10.
RM930393.
Vehicle Fitment
15007072 fits the rear axle of the 2018 Changan CS75 1.5T gasoline 2WD and the 2019 onward Changan CS85 Coupe 1.5T or 2.0T gasoline 2WD.
- Changan CS75: 2018 model year, 1.5T gasoline, front-wheel drive/2WD, rear axle; not for the 1.8T 4WD version.
- Changan CS85 Coupe: 2019 onward, 1.5T or 2.0T gasoline, front-wheel drive/2WD, rear axle.
The rear-axle application does not carry a left/right split; confirm the required side by VIN.
Product Features
- Double-row bearing: The bearing is integrated into a one-piece wheel hub assembly, keeping the bearing and flange together for installation and inspection.
- ABS sensor function: The unit includes an ABS sensor interface; protect the magnetic encoder from magnets, screwdrivers, and sharp tools.
- Five-bolt wheel interface: Five wheel bolt/stud positions with M12 × 1.5 thread define the wheel attachment; compare these details with the original hub before fitting.
- Complete unit only: The set contains one rear wheel hub bearing unit; mounting nuts, snap rings, and other installation accessories are not declared included.
Ordering Verification
- Match the OE number 15007072 and the original part markings on the removed hub.
- Confirm rear-axle position, 2WD drive type, ABS configuration, five wheel-bolt positions, and M12 × 1.5 thread.
- Do not use 3502140-M02, a Changan CS75 4WD rear-axle part, or 15007069, a front-axle part.
- Do not treat 15007074, 3550069-U03, HUB498T, or 34A10-A44 as confirmed replacements for this 2WD rear wheel hub assembly without VIN verification.
Installation Notes
Keep this sealed unit assembled; do not open or re-grease the double-row bearing, and press only on the rigid flange while keeping magnets and sharp tools away from the ABS encoder ring. Axle-nut and flange torque values are vehicle-specific, so take them from Changan service information for the exact model rather than from a generic table. After fitting, confirm the ABS connector seats, check harness routing and fault codes, and road-test for noise, heat, and wheel-end play.
Procurement And Supply Information
Ask the supplier for batch traceability and inspection records for the delivered lot, and fix packaging quantity, carton marking, and delivery terms in the purchase contract; custom packaging can be discussed for approved B2B quantities. On receipt, check the ABS connector cap, stud-thread protection, and rust-preventive packaging of each wheel hub assembly.
