06NU06181VHC3 Wheel Bearing For MERCEDES-BENZ
The DUHUI Bearing 06NU06181VHC3 wheel bearing is a single-row cylindrical roller bearing designed for Mercedes-Benz automotive drivetrain and transmission applications. With a 27 mm bore, 58 mm outer diameter, and 18 mm total width, this bearing is engineered to support high radial loads while accommodating axial displacement. It matches Mercedes-Benz OE specification 06NU06181VHC3 and is cross-referenced with SKF, NTN, and NSK equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2463 |
| Part Number | 06NU06181VHC3 |
| Product Type | Cylindrical Roller Bearing – Single Row |
| Bore Diameter (d) | 27.00 mm (1.063 inch) |
| Outer Diameter (D) | 58.00 mm (2.283 inch) |
| Width (B) | 18.00 mm (0.709 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2463
OE Numbers:
06NU06181VHC3
Reference Numbers (Interchange):
MERCEDES-BENZ: 06NU06181VHC3
Vehicle Fitment
MERCEDES-BENZ: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Cylindrical roller design with line contact between rollers and raceways – delivers high radial load capacity and low friction in transmission and drivetrain applications.
- Metric-series configuration with 27 mm bore and 58 mm outer diameter matches Mercedes-Benz OE 06NU06181VHC3 specifications for direct replacement.
- Heat-treated GCr15 bearing steel construction – precision-ground raceways for consistent performance and long service life.
- Open-type design supports splash lubrication and oil bath systems common in transmission applications.
- Cross-referenced with SKF, NTN, and NSK equivalents – confirmed interchange available.
Installation Notes
- Confirm bore diameter (27.00 mm) and outer diameter (58.00 mm) match your housing and shaft before installation.
- Inspect the shaft and housing for wear, scoring, or pitting – replace if damage is present.
- Apply appropriate lubricant (oil or grease) during installation – refer to your equipment manual for viscosity specifications.
- Ensure correct shaft and housing tolerances for optimal load distribution and service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces cylindrical roller bearings and automotive components to OE specifications. Contact us
