0182ACV51RLH Wheel Hub Bearing For Lexus
The DUHUI 0182ACV51RLH wheel hub bearing is a direct-fit rear axle left-side replacement designed for Lexus ES (_V6_) models from 2012 to 2018. This rear wheel hub bearing meets OE specifications 4245006120 and 4245006150, delivering reliable performance in the aftermarket. It is also cross-referenced with FEBEST 0182ACV51RLH and is designed for use with vehicles equipped with ABS .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01515 |
| Part Number | 0182ACV51RLH |
| Position | Rear Axle |
| Side | Left Hand (LH) |
| Inner Diameter 1 | 55.00 mm (2.165 inch) |
| Inner Diameter 2 | 75.90 mm (2.988 inch) |
| Outer Diameter | 135.00 mm (5.315 inch) |
| Bolt Holes | 5 |
| ABS Sensor | Equipped (with sensor) |
Note: This rear wheel hub bearing features a 5-bolt flange design with integrated ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01515
OE Numbers: 4245006120, 4245006150
Reference Numbers (Interchange):
LEXUS: 4245006120, 4245006150
FEBEST: 0182ACV51RLH
70090157, 764569, 764570, 982374
VKBA7691
HA590429
Vehicle Fitment
LEXUS: ES (_V6_) 200 (ASV61_) (2015-2018)
LEXUS: ES (_V6_) 250 (AVV60_, ASV60_) (2012-2018)
LEXUS: ES (_V6_) 300h (ASV60_, AVV60_, AVV60R) (2012-2018)
LEXUS: ES (_V6_) 350 (GSV60_) (2012-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Lexus ES (_V6_) applications
- Left-side specific fitment for precise installation
- Integrated ABS sensor for seamless compatibility with vehicle ABS systems
- 5-bolt flange design for enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 4245006120 and 4245006150 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 4245006120 or 4245006150 before installation
- Confirm this is the left-side rear axle bearing for your specific Lexus ES model
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Lexus service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
