BR930949 Rear Wheel Hub Assembly For Chrysler
The DUHUI Bearing BR930949 rear wheel hub assembly (DWH1979) is a direct-fit OE replacement designed for Chrysler and Dodge rear-wheel-drive and all-wheel-drive models. This rear wheel hub assembly includes the hub, bearing, and an integrated 86-tooth ABS sensor ring as a complete unit. Manufactured to match original equipment specifications including Chrysler 68223512AB, 68223512AC, and 68223512AD, this wheel hub assembly delivers reliable performance for these American applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1979 |
| Part Number | BR930949 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| ABS Ring Teeth | 86 |
| Rim Bolt Hole Quantity | 5 |
| Thread Size | M12 x 1.5 |
| Protection Level | IP68 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1979
OE Numbers:
BR930949, 68223512AB, 68223512AC, 68223512AD
Reference Numbers (Interchange):
GSP: 9400632
A.B.S.: 252804
Vehicle Fitment
CHRYSLER 300: 2011–2023
Saloon – RWD / 4WD
3.6L V6 – 2011-2023
5.7L V8 – 2011-2023
DODGE CHARGER: 2011–2023
Saloon – RWD / 4WD
3.6L V6 – 2011-2023
5.7L V8 – 2011-2023
DODGE CHALLENGER: 2011–2023
Coupe – RWD / 4WD
3.6L V6 – 2011-2023
5.7L V8 – 2011-2023
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– Assembly includes hub, bearing, and integrated 86-tooth ABS sensor ring.
– Compatible with RWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Chrysler and Dodge rear axle. Matches Chrysler specifications 68223512AB and 68223512AC.
- 86-tooth ABS sensor ring – provides high-resolution wheel speed signals for accurate ABS/ESP system operation.
- Innovative sealing ring designs (single-lip seals and U-shaped slip rings) with low-viscosity special greases – significantly reduce frictional torque.
- IP68-level sealing protection – bearing can be submerged in 2 meters of water for 24 hours without water ingress, keeping internal components dry and reliable in harsh wet or muddy conditions.
- Long-life grease with shear life of 100,000 hours – equivalent to 10 years of continuous high-speed rotation without failure, enabling true maintenance-free operation.
Installation Notes
- Verify your vehicle is a compatible Chrysler 300, Dodge Charger, or Dodge Challenger model before ordering.
- This assembly fits both rear driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the axle beam is clean and free of corrosion before installation.
- After installation, verify ABS sensor ring alignment and check for proper wheel speed signal to ensure ABS/ESP system functionality.
- Torque the hub mounting bolts and axle nut to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
