512549 Rear Wheel Hub Assembly For BMW
The DUHUI Bearing 512549 rear wheel hub assembly (DWH1902) is a direct-fit OE replacement designed for BMW X1 (E84), X2 (F39), 1 Series (F20/F21), and 2 Series (F22/F23) front-wheel-drive and all-wheel-drive models. This rear wheel hub assembly includes the hub and bearing as a complete unit. Manufactured to match original equipment specifications including BMW 33406789970, this wheel hub assembly delivers reliable performance for these compact and SAV applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1902 |
| Part Number | 512549 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Wheel Bearing Guide Diameter | 89.90 mm (3.539 inch) |
| ABS Sensor | Without integrated sensor |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1902
OE Numbers:
512549, 33406789970, 6789970
Reference Numbers (Interchange):
SKF: VKBA 6615
FAG: 713 6800 50
Vehicle Fitment
BMW X1 (E84): 2009–2015
SUV – RWD / 4WD
2.0L – 2009-2015
2.8L – 2009-2015
2.0L Diesel – 2009-2015
BMW X2 (F39): 2018–2022
SUV – FWD / 4WD
2.0L – 2018-2022
2.0L Diesel – 2018-2022
BMW 1 SERIES (F20, F21): 2011–2019
Hatchback – RWD
1.5L – 2011-2019
2.0L – 2011-2019
3.0L – 2011-2019
BMW 2 SERIES (F22, F23): 2014–2021
Coupe / Convertible – RWD
2.0L – 2014-2021
3.0L – 2014-2021
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– This hub assembly does NOT include an integrated ABS sensor – compatible with vehicles equipped with separate ABS sensors.
– Compatible with RWD, FWD, and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BMW X1, X2, 1 Series, and 2 Series rear axle. Matches BMW specification 33406789970.
- Wheel bearing guide diameter of 89.90 mm provides a strong base – maintains good spinning center in small cars and SAVs.
- Designed without integrated ABS sensor – simplifies component structure and allows modular repair approach with separate wheel speed sensors.
- Constructed using high-quality bearing steel and precise production techniques – provides smooth, silent operation and resists metal fatigue during long-term use.
- Sealed bearing design prevents ingress of moisture and dirt – ensures long-lasting performance in various weather conditions and on rough roads.
Installation Notes
- Verify your vehicle is a compatible BMW X1, X2, 1 Series, or 2 Series model before ordering.
- This assembly fits both rear driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the axle beam is clean and free of corrosion before installation.
- Verify wheel bearing guide diameter (89.90 mm) matches your vehicle specifications.
- Torque the hub mounting bolts and axle nut to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
