513386 Front Wheel Hub Assembly For BMW
The DUHUI Bearing 513386 front wheel hub assembly (DWH1899) is a direct-fit OE replacement designed for BMW 5 Series (F10, F11) and 5 Series Gran Turismo (F07) rear-wheel-drive and all-wheel-drive models. This front wheel hub assembly includes the hub and bearing as a complete unit. Manufactured to match original equipment specifications including BMW 31206872888, this wheel hub assembly delivers reliable performance for these premium executive applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1899 |
| Part Number | 513386 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Front Axle |
| Flange Diameter | 145.10 mm (5.713 inch) |
| Flange Offset | 43.90 mm (1.728 inch) |
| Bolt Circle Diameter | 120.10 mm (4.728 inch) |
| Wheel Hub Guide Diameter | 72.50 mm (2.854 inch) |
| Hub Pilot Diameter | 97.90 mm (3.854 inch) |
| Brake Pilot Diameter | 74.90 mm (2.949 inch) |
| Flange Design | 4-hole |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1899
OE Numbers:
513386, 31206872888
Reference Numbers (Interchange):
SKF: VKBA 6570
FAG: 713 6494 50
SNR: R150.52
Vehicle Fitment
BMW 5 SERIES (F10, F11): 2010–2017
Saloon / Estate – RWD / 4WD
2.0L – 2010-2017
3.0L – 2010-2017
4.4L V8 – 2010-2017
BMW 5 SERIES GRAN TURISMO (F07): 2009–2017
Liftback – RWD / 4WD
3.0L – 2009-2017
4.4L V8 – 2009-2017
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– 4-hole flange design distributes suspension force equally for structural stability.
– Compatible with RWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BMW 5 Series and 5 GT front axle. Matches BMW specification 31206872888.
- Flange diameter of 145.10 mm creates a large contact surface between suspension and hub assembly – increases load-carrying capacity for extended business travel and family use.
- Flange offset of 43.90 mm maintains correct wheel track width – stops uneven tyre wear and improves driving experience.
- Bolt circle diameter of 120.10 mm ensures an exact fit to wheel mounting points – guarantees stable, high-end driving.
- Hub pilot diameter of 97.90 mm provides a good fit to BMW axles – ensures proper power transfer and reduces abnormal sounds during acceleration and deceleration.
Installation Notes
- Verify your vehicle is a BMW 5 Series (F10/F11) or 5 Series Gran Turismo (F07) model before ordering.
- This assembly fits both front driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the knuckle is clean and free of corrosion before installation.
- Verify brake pilot diameter (74.90 mm) and wheel hub guide diameter (72.50 mm) match your vehicle specifications.
- Torque the axle nut and hub bolts to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
