513312 Front Wheel Hub Assembly For BMW
The DUHUI Bearing 513312 front wheel hub assembly (DWH2141) is a direct-fit OE replacement designed for BMW 3 Series (E46), 5 Series (E60/E61), X3 (E83), and X5 (E53) rear-wheel-drive and all-wheel-drive models. This front wheel hub assembly includes the hub and bearing as a complete unit. Manufactured to match original equipment specifications including BMW 31206773207, 31206779735, and 31206783747, this wheel hub assembly delivers reliable performance for these popular European applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH2141 |
| Part Number | 513312 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Front Axle |
| Flange Offset | 60.00 mm (2.362 inch) |
| ABS Sensor | Without integrated sensor |
| Bearing Steel | High-quality bearing steel |
| Grease Type | Long-life grease |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH2141
OE Numbers:
513312, 31206773207, 31206779735, 31206783747
Reference Numbers (Interchange):
SKF: VKBA 6558
FAG: 713 6110 60
SNR: R150.48
MOOG: HA590247
Vehicle Fitment
BMW 3 SERIES (E46): 1998–2005
Saloon / Estate / Coupe / Convertible – RWD
2.0L (M52/M54) – 1998-2005
2.5L (M52/M54) – 1998-2005
3.0L (M54) – 1998-2005
BMW 5 SERIES (E60, E61): 2003–2010
Saloon / Estate – RWD / 4WD
2.0L – 2003-2010
2.5L – 2003-2010
3.0L – 2003-2010
4.4L V8 – 2003-2010
BMW X3 (E83): 2003–2010
SUV – RWD / 4WD
2.0L – 2003-2010
2.5L – 2003-2010
3.0L – 2003-2010
BMW X5 (E53): 2000–2006
SUV – RWD / 4WD
3.0L (M54) – 2000-2006
4.4L V8 (M62) – 2000-2006
4.8L V8 (N62) – 2000-2006
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– This hub assembly does NOT include an integrated ABS sensor – compatible with vehicles equipped with separate ABS sensors.
– Modular servicing design allows separate wheel speed sensor replacement without replacing the entire bearing unit.
– Compatible with RWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BMW 3, 5, X3, and X5 front axle. Matches BMW specifications 31206773207, 31206779735, and 31206783747.
- Precision-engineered to withstand water, dust, and contaminants – high-quality bearing steel with long-life grease ensures wear resistance and smooth operation.
- Flange offset of 60.00 mm precisely set to influence kingpin offset, steering response, and wheel camber angle – fully complies with factory data for BMW’s unique precision steering and straight-line stability.
- Designed for modular servicing – no integrated ABS sensor allows separate replacement of wheel speed sensors without replacing the entire bearing unit.
- Restores critical suspension alignment reference – essential for accurate four-wheel alignment and recovery of original handling characteristics.
Installation Notes
- Verify your vehicle is a compatible BMW 3 Series (E46), 5 Series (E60/E61), X3 (E83), or X5 (E53) model before ordering.
- This assembly fits both front driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the knuckle is clean and free of corrosion before installation.
- Verify flange offset (60.00 mm) matches your vehicle specifications before installation.
- Torque the axle nut and hub bolts to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
