541014 Rear Wheel Hub Assembly For Nissan
The DUHUI Bearing 541014 rear wheel hub assembly (DWH1940) is a direct-fit OE replacement designed for Nissan Armada and Infiniti QX56 full-size SUV applications. This rear wheel hub assembly includes the hub, bearing, and an integrated ABS sensor as a complete unit. Manufactured to match original equipment specifications including Nissan 43202-9GG0A and 43202-ZZ90A, this wheel hub assembly delivers reliable performance for these heavy-duty SUV applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1940 |
| Part Number | 541014 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Flange Diameter | 171.00 mm (6.732 inch) |
| Offset | 56.20 mm (2.213 inch) |
| Wheel Pilot Diameter | 77.60 mm (3.055 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Wheel Stud Quantity | 6 |
| Spline Count | 32 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1940
OE Numbers:
541014, 43202-9GG0A, 43202-ZZ90A
Reference Numbers (Interchange):
SKF: BR930625
GSP: SP500702
A.B.S.: 993362A
SNR: R168.101
Vehicle Fitment
NISSAN ARMADA: 2004–2015
SUV – RWD / 4WD
5.6L V8 (VK56DE) – 2004-2015
NISSAN PATHFINDER: 2005–2012
SUV – RWD / 4WD
4.0L V6 – 2005-2012
5.6L V8 – 2005-2012
INFINITI QX56: 2004–2010
SUV – RWD / 4WD
5.6L V8 (VK56DE) – 2004-2010
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– Assembly includes hub, bearing, and integrated ABS sensor.
– Features 6-bolt hub construction with 32-spline setup for heavy-duty applications.
– Compatible with RWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Nissan Armada and Infiniti QX56 rear axle. Matches Nissan specifications 43202-9GG0A and 43202-ZZ90A.
- Integrated ABS sensor design – eliminates the need for separate sensor replacement and provides a complete repair solution.
- 32-spline setup delivers a wide contact surface and solid lock to the drive half-shaft.
- Flange diameter of 171.00 mm with 139.70 mm bolt circle and 6-bolt hub construction – designed to carry heavy weight and complex turning forces of full-size SUVs.
- Wheel pilot diameter of 77.60 mm matches the center bore – prevents lateral wheel movement under complex road conditions.
Installation Notes
- Verify your vehicle is a compatible Nissan Armada, Pathfinder, or Infiniti QX56 model before ordering.
- This assembly fits both rear driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the axle beam is clean and free of corrosion before installation.
- Verify spline count (32) matches your drive half-shaft before installation.
- Torque the hub mounting bolts and axle nut to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
