513439 Front Wheel Hub Assembly For LEXUS TOYOTA
The DUHUI Bearing 513439 front wheel hub assembly (DWH11029) is a direct-fit OE replacement designed for Lexus ES, Toyota Camry, RAV4, and other compatible front-wheel-drive models. This front wheel hub assembly includes the hub, bearing, and wheel studs as a complete unit with an integrated 48-tooth ABS tone ring. Manufactured to match original equipment specifications including Toyota 43550-06010 and 43550-06020, this wheel hub assembly delivers reliable performance for these popular Japanese applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH11029 |
| Part Number | 513439 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Front Axle |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| ABS Tone Ring | 48-tooth encoder type |
| Bearing Design | Gen 3 Ball Bearing |
| Drive Type | Non-driven wheel hub |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH11029
OE Numbers:
513439, 43550-06040, 43550-06010, 43550-06020
Reference Numbers (Interchange):
SKF: VKBA7477
A.B.S.: 9326070
BLUE PRINT: ADT382383
ASHUKI: 107015
MAGNETI MARELLI: 105010010002
GSP: 513439
Vehicle Fitment
TOYOTA CAMRY (XV70): 2017–2024
Saloon – FWD
2.5L (A25A-FKS) – 2017-2024
3.5L (2GR-FKS) – 2017-2024
2.5L Hybrid – 2017-2024
TOYOTA RAV4 (XA50): 2019–2024
SUV – FWD / 4WD
2.5L (A25A-FKS) – 2019-2024
2.5L Hybrid – 2019-2024
LEXUS ES (XZ10): 2018–2024
Saloon – FWD
3.5L (2GR-FKS) – 2018-2024
2.5L Hybrid – 2018-2024
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– Assembly includes hub, bearing, and wheel studs as a complete unit.
– This is a non-driven wheel hub assembly for front axle applications on FWD vehicles.
– Compatible with FWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Toyota and Lexus front axle. Matches Toyota specifications 43550-06010 and 43550-06020.
- 48-tooth encoder-type ABS tone ring provides accurate wheel speed measurement to the ECU – ensures brake system stability and safety.
- Gen 3 ball bearing design improves rotational smoothness and reduces friction – increases service longevity of the wheel end system.
- Bolt circle diameter of 114.30 mm matches wheel mounting points – prevents wobble or unusual noise while driving.
- Wheel studs are pre-installed – technicians do not need to install them separately, saving replacement time.
Installation Notes
- Verify your vehicle is a compatible Toyota Camry, RAV4, or Lexus ES model before ordering.
- This assembly fits both front driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the knuckle is clean and free of corrosion before installation.
- Torque the axle nut and hub bolts to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
- After installation, verify ABS tone ring alignment and check for proper wheel speed signal to ensure ABS system functionality.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
