37230-35130 Center Support Bearing For TOYOTA
This 37230-35130 center support bearing (also known as a carrier bearing or bracket bearing) provides a direct-fit replacement for Toyota Tacoma 2WD (VZN160, VZN170) and Hilux LN167. It supports the driveshaft at the center point, reduces driveline vibration, and protects universal joints from premature wear. This bearing matches OE specifications including Toyota part number 37230-35130.
Technical Specifications
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 37230-35130 |
| Bearing Type | Center Support Bearing |
| Inside Diameter | 1.181″ / 30.00 mm |
| Outside Diameter | 3.346″ / 85.00 mm |
| Width | 1.299″ / 33.00 mm |
| Bolt Hole Center | 5.774″ / 146.66 mm |
| Support Bearing Type | Housing Mounted Bearing |
| Mounting Bracket Included | Yes |
| Mounting Hole Quantity | 2 |
| Bushing Material | Rubber |
The inside diameter of 1.181 inches (30.00 mm) is the critical fitment spec for this bearing—this determines whether the bearing seats properly on your driveshaft. The bolt hole center measurement of 5.774 inches (146.66 mm) determines whether the bracket aligns with your vehicle’s chassis mounting points.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Number & Reference Numbers
DH Code:
OE Numbers:
37230-35130, RP5035
Reference Numbers (Interchange):
Toyota: 37230-35130
Toyota: RP5035
Vehicle Fitment
TOYOTA: Tacoma 2WD (VZN160, VZN170), Hilux (LN167)
Fitment note: Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement. This bearing matches Toyota OE specification 37230-35130 for Tacoma 2WD and Hilux models.
- Driveline support. Supports the driveshaft to ensure stability and reduce vibration during high-speed rotation.
- Universal joint protection. Helps protect the universal joint and extend its service life.
- Durable construction. Built to withstand radial and axial loads for reliable performance.
- Housing mounted design. Mounts directly to the vehicle chassis for stable driveshaft support.
- Vibration absorption. Reduces driveline vibration and noise, improving ride comfort.
Installation Notes
- Verify fitment. Confirm this bearing matches your original bearing specifications before installation.
- Check your vehicle configuration. This bearing is designed for Tacoma 2WD (VZN160, VZN170) and Hilux LN167 models.
- Proper alignment is critical. Ensure correct alignment during installation to prevent premature wear and driveline vibration.
- Inspect related components. Check the driveshaft and universal joints for wear before installing the new bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us
For fitment questions, compare your old part number against the OE numbers listed above.
