37230-35120 Center Support Bearing For TOYOTA
This 37230-35120 center support bearing (also known as a carrier bearing or bracket bearing) provides a direct-fit replacement for Toyota Tacoma 2WD models (VZN160, VZN170). It supports the driveshaft at the center point, reduces driveline vibration, and protects universal joints from premature wear. This bearing matches OE specifications including Toyota part numbers 37230-35120 and 37230-34120.
Technical Specifications
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 37230-35120 |
| Bearing Type | Center Support Bearing |
| Inside Diameter | 1.181″ / 30.00 mm |
| Width | 2.244″ / 57.00 mm |
| Height | 4.331″ / 110.00 mm |
| Support Bearing Type | Housing Mounted Bearing |
| Bearing Included | Yes (ball bearing) |
The inside diameter of 1.181 inches (30.00 mm) is the critical fitment spec for this bearing—this determines whether the bearing seats properly on your driveshaft. The overall height and width are also key dimensions to verify against your original bearing.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Number & Reference Numbers
DH Code:
OE Numbers:
37230-35120, 37230-34120
Reference Numbers (Interchange):
Toyota: 37230-35120
Toyota: 37230-34120
Vehicle Fitment
TOYOTA: Tacoma 2WD (VZN160, VZN170)
Fitment note: Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement. This bearing matches Toyota OE specifications 37230-35120 and 37230-34120 for Tacoma 2WD models.
- Driveline support. Supports the driveshaft to ensure stability and reduce vibration during high-speed rotation.
- Universal joint protection. Helps protect the universal joint and extend its service life.
- Ball bearing construction. The bearing includes a precision ball bearing for smooth rotation and reliable performance.
- Durable construction. Built to withstand radial and axial loads for reliable performance.
Installation Notes
- Verify fitment. Confirm this bearing matches your original bearing specifications before installation.
- Check your vehicle configuration. This bearing is designed for Tacoma 2WD (VZN160, VZN170) models.
- Inspect the driveshaft. Check the driveshaft surface for wear or damage before installing the new bearing.
- Proper alignment is critical. Ensure correct alignment during installation to prevent premature wear and driveline vibration.
- Inspect related components. Check the universal joints and center support bracket for wear before installing the new bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us
For fitment questions, compare your old part number against the OE numbers listed above.
