1696389 Center Support Bearing For VOLVO
This 1696389 center support bearing (also known as a carrier bearing or propeller shaft bearing) provides a direct-fit replacement for select Volvo trucks manufactured between 1979 and 1994. It supports the driveshaft at the center point, reduces driveline vibration, and protects universal joints from premature wear. This bearing matches OE specification 1696389.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 1696389 |
| Bearing Type | Center Support Bearing |
| Inside Diameter | 2.362″ / 60.00 mm |
| Bearing Width | 1.181″ / 30.00 mm |
| Length from Hole to Hole | 7.795″ / 198.00 mm |
| Weight | 2.88 kg |
| Material | Metal (inner core) + Rubber (outer seal) |
| Temperature Range | -40°C to +120°C |
The inside diameter of 2.362 inches (60.00 mm) is the critical fitment spec for this bearing—this determines whether the bearing seats properly on your driveshaft. The bearing width of 1.181 inches (30.00 mm) and the hole-to-hole length of 7.795 inches (198.00 mm) are also key dimensions to verify against your original bearing.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Number & Reference Numbers
DH Code:
OE Numbers:
1696389, 263567, 8171366, 263000, 16229553
Reference Numbers (Interchange):
DT Spare Parts: 2.34050
S.000.286
S.000.285
SB389
0334004
4047755104870
RCB1216
0334008
BK321
03.34.008
Vehicle Fitment
VOLVO TRUCKS: F6, F7, F10, F12, N7, N10, N12 (1979–1994 models)
Fitment note: This bearing fits Volvo trucks manufactured between 1979 and 1994. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement. This bearing matches Volvo OE specification 1696389 for F6, F7, F10, F12, N7, N10, and N12 truck models.
- Durable metal-rubber composite construction. Combines a metal inner core for structural strength with a rubber outer seal for vibration damping and environmental resistance.
- Driveline support. Supports the driveshaft to ensure stability and reduce vibration during high-speed rotation.
- Universal joint protection. Helps protect the universal joint and extend its service life.
- Heavy-duty load capacity. Engineered for continuous operation under heavy loads, ideal for commercial vehicle applications.
- Wide temperature range. Operates reliably from -40°C to +120°C in extreme climates.
Installation Notes
- Verify fitment. Confirm this bearing matches your original bearing specifications before installation.
- Check your vehicle configuration. This bearing is designed for Volvo F6, F7, F10, F12, N7, N10, and N12 trucks manufactured between 1979 and 1994.
- Verify the inside diameter. This bearing is designed for a 60mm (2.362″) bearing opening. If your vehicle has a different size, this part won’t fit.
- Check dimensions. Verify the bearing width (30mm) and hole-to-hole length (198mm) against your original bearing before installation.
- Proper alignment is critical. Ensure correct alignment during installation to prevent premature wear and driveline vibration.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us
For fitment questions, compare your old part number against the OE numbers listed above.
