HBD206FF Center Support Bearing For FORD MAZDA
This HBD206FF center support bearing with two flingers provides a direct-fit replacement for select Ford and Mazda pickup applications, including the Ford Ranger and Mazda B2300, B3000, and B4000 models. This driveshaft support bearing (also known as a carrier bearing or hanger bearing) maintains proper driveshaft alignment, absorbs driveline vibration, and supports the rotating shaft on vehicles with two-piece propeller shafts. This part matches OE specifications including Ford part number F0TZ4800A and interchanges with industry-standard references including N211590-1X.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | HBD206FF |
| Product Type | Center Support Bearing |
| Inside Diameter | 1.181″ / 30.00 mm |
| Height | 1.929″ / 49.00 mm |
| Width | 5.866″ / 149.00 mm |
| Thickness | 0.630″ / 16.00 mm |
| Weight | 0.880 kg |
| Features | W/ Two Flingers |
The inside diameter of 1.181 inches (30.00 mm) is the critical fitment spec for this center support bearing. Verify this dimension matches your driveshaft diameter before ordering. The two-flinger design provides enhanced protection against contaminants entering the bearing assembly.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Number & Reference Numbers
DH Code:
OE Numbers:
F0TZ4800A
Reference Numbers (Interchange):
SKF: HBD206FF
N211590-1X
Vehicle Fitment
Ford Ranger: 1990–2003
Mazda B2300: 1994–2000
Mazda B3000: 1994–2000
Mazda B4000: 1994–2000
Fitment note: This center support bearing fits Ford Ranger and Mazda B2300, B3000, and B4000 models. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement. This center support bearing matches Ford OE specification F0TZ4800A for Ranger and Mazda pickup applications.
- Two-flinger design. Dual flingers provide enhanced protection against contaminants entering the bearing assembly.
- Precision inside diameter. Features 30.00 mm inside diameter for exact driveshaft compatibility.
- Rubber cushion element. Absorbs driveline vibration and reduces noise transmitted to the vehicle cabin.
- Customization options. Product customization (Logo / Code / Pattern / Words) and packaging customization (Plastic bag / White box / Color box / Carton / Pallet) available upon request.
Installation Notes
- Verify shaft diameter. Measure your driveshaft diameter to confirm it matches the 30.00 mm inside diameter before installation.
- Check alignment. Verify the driveshaft alignment before tightening the bracket bolts – misalignment will cause premature bearing failure.
- Inspect rubber support. Examine the rubber cushion element for any signs of cracking or deterioration before installation.
- Replace as complete assembly. Do not attempt to press the bearing out of the bracket – replace the entire center support bearing unit.
- Professional installation recommended. Proper bearing alignment and torque specifications are critical to prevent premature wear and driveline issues.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us
For fitment questions, compare your old part number against the OE numbers listed above.
