Wheel Bearing Kits VKBA3981 For NISSAN
The DUHUI Bearing VKBA3981 front wheel bearing kit (DBK574) is a direct-fit OE replacement kit designed for the front axle of Nissan Almera Tino (V10) models from 2002 to 2006 . This front wheel bearing kit includes the bearing, split pin, and two circlips for a complete installation . Manufactured to match OE specifications including VKBA3981, 713613810, and 402102Y000, this wheel bearing kit delivers reliable performance for these compact MPV and passenger car applications .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK574 |
| Part Number | VKBA3981 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Front Axle |
| Inner Diameter | 40.00 mm (1.575 in) |
| Outer Diameter | 74.00 mm (2.913 in) |
| Width | 38.00 mm (1.496 in) |
| Kit Contents | Bearing × 1, Split Pin × 1, Circlip × 2 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK574
OE Numbers:
VKBA3981, R168.62, 713613810, 402102Y000, 402022Y010, 402103Z000, 402104N200, 4021405U00, J4701035
Reference Numbers (Interchange):
SKF: VKBA3981
SNR: R168.62
FAG: 713613810
Blue Print: ADN18248
Motaquip: VBK1341
Optimal: 701626
NTN: AU09113LLL260
Vehicle Fitment
NISSAN ALMERA TINO (V10): 2000–2006
1.8 – 2002-2006
2.0 – 2000-2006
2.2 dCi – 2001-2006
NISSAN PRIMERA (P12): 2002–2008
1.6, 1.8, 2.0, 2.2 dCi – 2002-2008
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Compatible with FWD variants of the listed models.
– Kit includes two circlips for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Nissan Almera Tino and Primera. Matches OE specifications 402102Y000 and 713613810 .
- Complete wheel bearing kit includes bearing, split pin, and two circlips for a hassle-free installation .
- Double-row angular contact design provides stable load distribution for compact MPV and passenger car applications .
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 2000-2006 Nissan Almera Tino (V10) or 2002-2008 Nissan Primera (P12) before ordering.
- Compare inner diameter (40.00 mm), outer diameter (74.00 mm), and width (38.00 mm) against your original bearing before installing .
- This kit fits both front driver and passenger sides. Sold individually.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Ensure both circlips are properly seated and the split pin is securely installed .
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
