Wheel Bearing Kits VKBA3928 For NISSAN
The DUHUI Bearing VKBA3928 rear wheel bearing kit (DBK543) is a direct-fit OE replacement kit designed for the rear axle of 1993-2001 Nissan Altima, Maxima, and Sentra models. This rear wheel bearing kit includes the hub assembly and split pin for a complete installation. Manufactured to match OE specifications including VKBA3928, 4320070N05, and 4320099N00, this wheel bearing kit delivers reliable performance for these mid-size and compact passenger car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK543 |
| Part Number | VKBA3928 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Inner Diameter | 30.00 mm (1.181 in) |
| Outer Diameter | 68.00 mm (2.677 in) |
| Width | 40.00 mm (1.575 in) |
| Kit Contents | Hub × 1, Split Pin × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK543
OE Numbers:
VKBA3928, 4320070N05, 4320070N06, 4320070N07, 4320099N00, 4320099N01, 4320050R10, 4000170NR5, J4711027
Reference Numbers (Interchange):
SKF: VKBA3928
Timken: HA590108
FAG: 713639310
NTN: 512012
Mevotech: H512012
Vehicle Fitment
NISSAN ALTIMA (L30): 1993–1997
2.4 – 1993-1997
NISSAN ALTIMA (L31): 1998–2001
2.4 – 1998-2001
NISSAN MAXIMA (A32): 1995–1999
3.0 – 1995-1999
NISSAN SENTRA (B14): 1995–1999
1.6, 1.8, 2.0 – 1995-1999
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Compatible with FWD variants of the listed models.
– Kit includes hub assembly and split pin for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Nissan Altima, Maxima, and Sentra. Matches OE specifications 4320070N05 and 4320099N00.
- Complete wheel bearing kit includes hub and split pin for a hassle-free installation.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Precision-matched bearing raceways and rolling elements minimize noise and vibration.
- Split pin included for secure axle nut retention.
Installation Notes
- Verify your vehicle is a 1993-2001 Nissan Altima, Maxima, or Sentra before ordering.
- Compare inner diameter (30.00 mm), outer diameter (68.00 mm), and width (40.00 mm) against your original bearing before installing.
- This kit fits both rear driver and passenger sides. Sold individually.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Install the split pin securely after torqueing the axle nut.
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
