Wheel Bearing Kits VKBA3229 For MAZDA
The DUHUI Bearing VKBA3229 rear wheel bearing kit (DBK178) is a direct-fit OE replacement kit designed for the rear axle of select Mazda 626 (GF platform) and Capella models from 1997 to 2002. This rear wheel bearing kit includes the hub assembly and retaining nut for a complete installation. Manufactured to match original equipment (OE) specifications including Mazda part numbers GA5R2615X, GE4T2615X, and GE4T2615XA, this wheel bearing kit delivers reliable performance for these mid-size sedan and hatchback applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK178 |
| Part Number | VKBA3229 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Flange Diameter | 128.00 mm (5.039 in) |
| Bolt Circle Diameter | 100.00 mm (3.937 in) |
| Wheel Pilot Diameter | 55.00 mm (2.165 in) |
| Brake Pilot Diameter | 56.00 mm (2.205 in) |
| Flange Offset | 56.00 mm (2.205 in) |
| Hub Pilot Diameter | 64.00 mm (2.520 in) |
| Rim Hole Number | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Kit Contents | Hub × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK178
OE Numbers:
VKBA3229, GA5R2615X, GE4T2615X, GE4T2615XA, 853010243
Reference Numbers (Interchange):
SKF: VKBA3229
FAG: 713615670
TIMKEN: 513270
Mazda: GE4T-26-15XA, GA5R-26-15X
Vehicle Fitment
MAZDA 626 V (GF): 1997–2002
1.8 (GF8P) – 1997-2000
2.0 (GFFP) – 1997-2002
2.0 TD (GFFP) – 2000-2002
2.5 (GFS9) – 1997-2002
MAZDA CAPELLA (GF): 1997–2002
All variants
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Compatible with 4-Hole wheel mounting patterns.
– This is the rear hub bearing assembly for GF platform Mazdas.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda 626 and Capella GF. Matches OE specifications GA5R2615X and GE4T2615X/ XA.
- Complete wheel bearing kit includes hub assembly and retaining nut for a hassle-free installation.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- 4-bolt flange configuration for secure rear axle mounting.
- Wheel studs are pre-installed.
Installation Notes
- Verify your vehicle is a 1997-2002 Mazda 626 or Capella (GF platform) before ordering.
- Compare flange diameter (128.00 mm) and bolt circle (100.00 mm) against your original hub before installing.
- This kit fits both rear driver and passenger sides. Sold individually.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
