Wheel Bearing Kits VKBA947 For MAZDA
The DUHUI Bearing VKBA947 rear wheel bearing kit (DBK1006) is a direct-fit OE replacement kit designed for the rear axle of 1985-1991 Mazda 323 BF models, including the 1.6 GT Turbo variant. This rear wheel bearing kit includes two bearings, an oil seal, and a retaining nut for a complete installation. Manufactured to match original equipment specifications including Mazda part numbers 94535218 and 52730-36200, this wheel bearing kit delivers reliable performance for these classic compact car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK1006 |
| Part Number | VKBA947 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Bearing × 2, Oil Seal × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK1006
OE Numbers:
VKBA947, 60521282, 94535218, 52730-36200, 40215-A0100, 90368-19037, 11055109
Reference Numbers (Interchange):
SKF: VKBA947
FAG: 713615230
NSK: KH10027
Vehicle Fitment
MAZDA 323 III (BF): 1985–1991
1.1 (BF1) – 1985-1991
1.3 (BF2) – 1985-1991
1.5 (BF5) – 1985-1991
1.6 (BF6) – 1985-1991
1.6 GT Turbo (BFMP) – 1985-1991
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes two bearings, one oil seal, and one retaining nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda 323 BF. Matches OE specifications 94535218 and 52730-36200.
- Complete wheel bearing kit includes two bearings, oil seal, and retaining nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of classic compact car applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1985-1991 Mazda 323 BF before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the oil seal is properly seated during installation.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
