Wheel Bearing Kits VKBA1354 For MAZDA
The DUHUI Bearing VKBA1354 rear wheel bearing kit (DBK041) is a direct-fit OE replacement kit designed for the rear axle of 1984-1987 Mazda 929 II Coupe (HB) and compatible 626 models. This rear wheel bearing kit includes the bearing, circlip, and retaining nut for a complete installation. Manufactured to match original equipment specifications including Mazda part numbers H00126151, H00126151A, and H00126151B, this wheel bearing kit delivers reliable performance for these classic mid-size coupe and sedan applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK041 |
| Part Number | VKBA1354 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Bearing × 1, Circlip × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK041
OE Numbers:
VKBA1354, H00126151, H00126151A, H00126151B, 51878221, 713615190, QWB762
Reference Numbers (Interchange):
SKF: VKBA1354
FAG: 713615190
Mazda: H001-26-151, H001-26-151A, H001-26-151B
Vehicle Fitment
MAZDA 929 II Coupe (HB): 1984–1987
2.0 i Turbo (HBES) – 1984-1987
2.0 – all variants
MAZDA 626 (GC): 1983–1987
2.0 – 1983-1987
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, circlip, and retaining nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda 929 and 626. Matches OE specifications H00126151 and H00126151A.
- Complete wheel bearing kit includes bearing, circlip, and retaining nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of classic mid-size coupe applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1984-1987 Mazda 929 II or 626 before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the circlip is properly seated before torqueing the axle nut to manufacturer specification.
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
