Wheel Bearing Kits VKBA1349 For MAZDA
The DUHUI Bearing VKBA1349 rear wheel bearing kit (DBK036) is a direct-fit OE replacement kit designed for the rear axle of 1988-1992 Mazda 626 III (GD) and compatible Ford Telstar models. This rear wheel bearing kit includes the bearing, oil seal, circlip, and retaining nut for a complete installation. Manufactured to match original equipment specifications including Mazda part number GJ21-26-151, this wheel bearing kit delivers reliable performance for these classic mid-size sedan and hatchback applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK036 |
| Part Number | VKBA1349 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Bearing × 1, Oil Seal × 1, Circlip × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK036
OE Numbers:
VKBA1349, GJ21-26-151, 200105, BRT1069, 19019594, J4713010, QWB851, R170.16
Reference Numbers (Interchange):
SKF: VKBA1349
SNR: R170.16
Mazda: GJ21-26-151
Vehicle Fitment
MAZDA 626 III (GD): 1988–1992
Hatchback, Saloon variants
1.8 – 1988-1992
2.0 – 1988-1992
2.2 12V (GD102) – 1988-1992
2.0 D – 1988-1992
FORD TELSTAR (GD): 1988–1992
All variants
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, oil seal, circlip, and retaining nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda 626 and Ford Telstar. Matches OE specification GJ21-26-151.
- Complete wheel bearing kit includes bearing, oil seal, circlip, and retaining nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of classic mid-size applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1988-1992 Mazda 626 or Ford Telstar before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the oil seal is properly seated and the circlip is correctly installed.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
