Wheel Bearing Kits VKBA715 For MITSUBISHI
The DUHUI Bearing VKBA715 rear wheel bearing kit (DBK877) is a direct-fit OE replacement kit designed for the rear axle of 1977-1981 Mitsubishi Lancer Celeste (A7_) and compatible Lancer models. This rear wheel bearing kit includes the bearing, oil seal, and spacer sleeve for a complete installation. Manufactured to match original equipment specifications including Mitsubishi part numbers MB393919, MA181498, and MA103731, this wheel bearing kit delivers reliable performance for these classic sports coupe and sedan applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK877 |
| Part Number | VKBA715 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Bearing × 1, Oil Seal × 1, Spacer Sleeve × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK877
OE Numbers:
VKBA715, R173.01, MWK180, MB393919, MA181498, MA103731, EUB1025, BRT516
Reference Numbers (Interchange):
SKF: VKBA715
SNR: R173.01
Mitsubishi: MB393919, MA181498, MA103731
Vehicle Fitment
MITSUBISHI LANCER CELESTE (A7_): 1977–1981
1.6 ST (A73A) – 1977-1981
MITSUBISHI LANCER (A7_): 1977–1981
All variants
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, oil seal, and spacer sleeve for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi Lancer Celeste and Lancer. Matches OE specifications MB393919 and MA181498.
- Complete wheel bearing kit includes bearing, oil seal, and spacer sleeve for a hassle-free installation.
- Precision-engineered to meet the performance requirements of classic sports coupe applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1977-1981 Mitsubishi Lancer Celeste or Lancer before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the oil seal is properly seated and the spacer sleeve is correctly positioned during installation.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
