Wheel Bearing Kits VKBA7592 For MITSUBISHI
The DUHUI Bearing VKBA7592 front wheel bearing kit (DBK945) is a direct-fit OE replacement kit designed for the front axle of 1994-1996 Mitsubishi Galant VII (E5_A, E7_A, E8_A) models. This front wheel bearing kit includes the hub assembly and split pin for a complete and secure installation. Manufactured to match original equipment specifications including Mitsubishi part numbers MB631512, MB631514, and MB633512, this wheel bearing kit delivers reliable performance for these mid-size sedan applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK945 |
| Part Number | VKBA7592 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Front Axle |
| Kit Contents | Hub × 1, Split Pin × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK945
OE Numbers:
VKBA7592, MB631512, MB631514, MB633512, MB864847, MB949097, MR103664, MR334386
Reference Numbers (Interchange):
SKF: VKBA7592
Mitsubishi: MB631512, MB631514, MB633512
Vehicle Fitment
MITSUBISHI GALANT VII (E5_A, E7_A, E8_A): 1994–1996
1.8 (E52A) – 1994-1996
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes hub assembly and split pin for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi Galant VII. Matches OE specifications MB631512 and MB631514.
- Complete wheel bearing kit includes hub assembly and split pin for a hassle-free installation.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Hub assembly design simplifies front wheel bearing replacement.
Installation Notes
- Verify your vehicle is a 1994-1996 Mitsubishi Galant VII before ordering.
- This kit fits both front driver and passenger sides. Sold individually.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Secure the axle nut with the included split pin.
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
