Wheel Bearing Kits VKBA7405 For MITSUBISHI
The DUHUI Bearing VKBA7405 rear wheel bearing kit (DBK891) is a direct-fit OE replacement kit designed for the rear axle of 2003-2013 Mitsubishi Lancer VII (CS_A, CT_A) and compatible Outlander models. This rear wheel bearing kit includes the hub assembly for a complete and secure installation. Manufactured to match original equipment specifications including Mitsubishi part numbers MR403730 and MR527452, this wheel bearing kit delivers reliable performance for these compact sedan and SUV applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK891 |
| Part Number | VKBA7405 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Hub × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK891
OE Numbers:
VKBA7405, R173.49, MR403730, MR527452, MR493619, MB809577
Reference Numbers (Interchange):
SKF: VKBA7405
SNR: R173.49
Mitsubishi: MR403730, MR527452, MR493619
Vehicle Fitment
MITSUBISHI LANCER VII (CS_A, CT_A): 2003–2013
Rear Axle – FWD, AWD
1.3 – 2003-2013
1.5 – 2003-2013
1.6 – 2003-2013
1.8 – 2003-2013
2.0 – 2003-2013
MITSUBISHI OUTLANDER (CW_W): 2003–2013
Rear Axle – AWD
All variants
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes hub assembly for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi Lancer and Outlander. Matches OE specifications MR403730 and MR527452.
- Complete wheel bearing kit includes hub assembly for a hassle-free installation.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Hub assembly design simplifies rear wheel bearing replacement.
Installation Notes
- Verify your vehicle is a 2003-2013 Mitsubishi Lancer VII or Outlander before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Torque the axle nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
