Wheel Bearing Kits VKBA3953 For HONDA
The DUHUI Bearing VKBA3953 rear wheel bearing kit (DBK560) is a direct-fit OE replacement kit designed for the rear axle of 1998-2002 Honda Accord models equipped with the 2.3L L4 engine, non-ABS brake systems, and rear drum brakes . This rear wheel bearing kit includes the complete hub assembly and a new retaining nut for a straightforward installation . Manufactured to match original equipment specifications including Honda part number 42200S84A01, this wheel bearing kit delivers reliable performance for these specific Accord applications .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK560 |
| Part Number | VKBA3953 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Kit Contents | Hub × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK560
OE Numbers:
VKBA3953, 42200S84A01
Reference Numbers (Interchange):
SKF: VKBA3953
Timken: HA590215
Vehicle Fitment
HONDA ACCORD (CG, CH): 1998–2002
Rear Axle – FWD
2.3L L4 – 1998-2002
Non-ABS
Rear Drum Brakes
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Specifically designed for L4 models with rear drum brakes and non-ABS systems. Not compatible with V6 models, models with rear disc brakes, or ABS-equipped vehicles .
– Includes hub assembly and retaining nut for complete installation.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Honda Accord (L4, Non-ABS, Drum Brakes). Matches OE specification 42200S84A01.
- Complete hub assembly with pre-installed bearing simplifies rear wheel bearing replacement.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Includes retaining nut for a complete installation.
Installation Notes
- Verify your vehicle is a 1998-2002 Honda Accord with 2.3L L4 engine, non-ABS, and rear drum brakes before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Torque the retaining nut to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
