Wheel Bearing Kits VKBA6736 For LAND ROVER
The DUHUI Bearing VKBA6736 front wheel bearing kit (DBK1174) is a direct-fit OE replacement kit designed for the front axle of 1994-2002 Land Rover Range Rover II (P38A) 4×4 models. This front wheel bearing kit includes the bearing, circlip, retaining nut, and four mounting bolts for a complete and secure installation. Manufactured to match original equipment specifications, this wheel bearing kit delivers reliable performance for these luxury SUV applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK1174 |
| Part Number | VKBA6736 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Front Axle |
| Kit Contents | Bearing × 1, Circlip × 1, Nut × 1, Bolt × 4 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK1174
OE Numbers:
VKBA6736, 72084, 8004
Reference Numbers (Interchange):
SKF: VKBA6736
FAG: 713645140
Vehicle Fitment
LAND ROVER RANGE ROVER II (P38A): 1994–2002
Front Axle – 4×4
2.5 D (BMW M51) – 1994-2002
2.5 D 4×4 – 1994-2002
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, circlip, retaining nut, and four mounting bolts for complete installation.
– Compatible with 4×4 variants only.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Land Rover Range Rover P38A. Matches OE specifications 72084 and 8004.
- Complete wheel bearing kit includes bearing, circlip, retaining nut, and four mounting bolts for a hassle-free installation.
- Heavy-duty design engineered for the demands of luxury SUV and off-road applications.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
Installation Notes
- Verify your vehicle is a 1994-2002 Land Rover Range Rover II (P38A) 4×4 before ordering.
- This kit fits both front driver and passenger sides. Sold individually.
- Ensure the circlip is properly seated before torqueing the retaining nut to manufacturer specification.
- Torque the four mounting bolts to manufacturer specification (refer to service manual).
- Do not use an impact wrench to tighten axle nuts or bolts – over-torquing can damage the bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
