Wheel Bearing Kits VKBA3254 For HONDA
The DUHUI Bearing VKBA3254 rear wheel bearing kit (DBK190) is a direct-fit OE replacement kit designed for Honda Accord V Aerodeck (CE) front-wheel-drive models. This rear wheel bearing kit includes the hub and nut for a complete installation. Manufactured to match original equipment specifications including Honda 42200-SV4-N02, this wheel bearing kit delivers reliable performance for these Japanese estate applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK190 |
| Part Number | VKBA3254 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Rear Axle |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Rim Hole Number | 4 |
| Kit Contents | Hub × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK190
OE Numbers:
42200-SV4-N02, 42200-SV4-N01, 42200-SM5-A01, 42200-SV2-N50
Reference Numbers (Interchange):
SKF: VKBA3254
SNR: R174.54
FAG: 713617750
MOOG: 513079
OPTIMAL: 917223
BLUE PRINT: ADH28116
Vehicle Fitment
HONDA ACCORD V AERODECK (CE): 1993–1998
Estate – FWD
2.2 i ES (CE1) – 09/1993-02/1998
2.0 i LS 16V (CE2) – 1993-1998
2.0 i 16V (CE2) – 1993-1998
HONDA ACCORD V (CD, CC): 1993–1998
Saloon – FWD
2.0 i S – 1993-1998
2.2 i 16V – 1993-1998
2.3 i 16V – 1993-1998
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes hub and nut for complete installation.
– Compatible with FWD variants of the listed models.
– Honda TSB 97-018 notes that rear bearing hub caps on 1990-96 Accord models may allow water ingress. When replacing, install updated hub caps to prevent premature failure.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Honda Accord V Aerodeck rear axle. Matches OE specifications 42200-SV4-N02.
- Complete wheel bearing kit includes hub and nut for a hassle-free installation.
- Flange diameter of 152.00 mm with 4-bolt pattern matches Honda factory fitment.
- Cross-referenced with major brands including SKF VKBA3254, SNR R174.54, and FAG 713617750 for easy part identification.
Installation Notes
- Verify your vehicle is a Honda Accord V Aerodeck (CE1) or compatible model before ordering.
- This kit fits both rear driver and passenger sides. Sold individually.
- Ensure the hub surface is clean and free of corrosion before installation.
- Replace the hub nut with the one included in the kit. The nut is a critical retaining component.
- Torque the hub nut to manufacturer specification (refer to service manual). Do not use an impact wrench for final tightening.
- Honda recommends replacing rear bearing hub caps (P/N 42326-SG0-000) when replacing the hub bearing assembly on 1990-96 Accord models to prevent water contamination and premature failure.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and related components to OE specifications. Contact us
