Wheel Bearing Kits VKBA920 For FORD
The DUHUI Bearing VKBA920 front wheel bearing kit (DBK993) is a direct-fit OE replacement designed for Ford Sierra II (GBG, GB4) all-wheel-drive models. This front wheel bearing kit includes two bearings, two oil seals, and a hub nut for a complete installation. Manufactured to match original equipment specifications including Ford 92GB1215AA and 5013161, this wheel bearing kit delivers reliable performance for these classic European 4×4 applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK993 |
| Part Number | VKBA920 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Front Axle |
| Inner Diameter | 36.00 mm (1.417 inch) |
| Outer Diameter | 70.00 mm (2.756 inch) |
| Width | 37.00 mm (1.457 inch) |
| Kit Contents | Bearing × 2, Oil Seal × 2, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK993
OE Numbers:
92GB1215AA, 5013161, 92GB-1215-AA
Reference Numbers (Interchange):
SKF: VKBA920
SNR: R152.35
FAG: 713678060
QUINTON HAZELL: QWB141
BRT BEARINGS: BRT440
FIRST LINE: FBK184
BORG & BECK: BWK184
MOOG: FD-WB-12730
OPTIMAL: 301130
Vehicle Fitment
FORD SIERRA II (GBG, GB4): 1987–1993
Saloon / Hatchback – 4WD
2.0L – 1990-1993
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes two bearings, two oil seals, and one hub nut for complete installation.
– Compatible with 4WD variants of the listed models.
– Please verify vehicle is equipped with 4×4 system before ordering – rear-wheel-drive Sierra II models use a different bearing kit (VKBA3533).
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Ford Sierra II 4×4 front axle. Matches Ford specifications 92GB1215AA and 5013161.
- Complete wheel bearing kit includes two bearings, two oil seals, and hub nut for a hassle-free installation.
- Precision-engineered for 4×4 applications – manufactured to withstand demanding all-wheel-drive operating conditions.
- Cross-referenced with major brands including SKF VKBA920, SNR R152.35, and FAG 713678060 for easy part identification.
Installation Notes
- Verify your vehicle is a Ford Sierra II (GBG, GB4) with 4WD system and 2.0L engine before ordering.
- This kit fits both front driver and passenger sides. Sold individually.
- Ensure both bearings are properly pressed onto the hub – apply pressure to the inner ring only.
- Replace both oil seals with those included in the kit. Old seals will leak regardless of new bearings.
- Torque the hub nut to manufacturer specification (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and related components to OE specifications. Contact us
