Wheel Bearing Kits VKBA3951 For HONDA
The DUHUI Bearing VKBA3951 front wheel bearing kit (DBK558) is a direct-fit OE replacement designed for Honda CR-V II (2001-2007) front-wheel-drive and all-wheel-drive models. This front wheel bearing kit includes the bearing, circlip, and hub nut for a complete installation. Manufactured to match original equipment specifications including Honda 44300-S0A-003 and 44300-S1A-E01, this wheel bearing kit delivers reliable performance for these popular SUV applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK558 |
| Part Number | VKBA3951 |
| Product Type | Wheel Bearing Kit |
| Installation Location | Front Axle |
| Inner Diameter | 45.00 mm (1.772 inch) |
| Outer Diameter | 84.00 mm (3.307 inch) |
| Width | 40.00 mm (1.575 inch) |
| Kit Contents | Bearing × 1, Circlip × 1, Nut × 1 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DBK558
OE Numbers:
44300-S0A-003, 44300-S1A-E01, 44300-S47-008, 44300-S84-A02, 44300-S84-A01, 44300-S9A-008, 88982934
Reference Numbers (Interchange):
SKF: VKBA3951
SNR: R174.40
JAPKO: J4704025
Vehicle Fitment
HONDA CR-V II (RD5, RD6, RD7, RD8, RD9): 2001–2007
SUV – FWD / 4WD
2.0L (K20A4) – 2001-2007
2.2L CTDi – 2001-2007
HONDA ELEMENT: 2002–2011
SUV – FWD / 4WD
2.4L – 2002-2011
Position: Front Axle (both driver and passenger sides)
Important Notes:
– This kit covers one wheel; order two for a full axle.
– Kit includes bearing, circlip, and hub nut for complete installation.
– Compatible with FWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Honda CR-V II front axle. Matches Honda specifications 44300-S0A-003 and 44300-S1A-E01.
- Complete wheel bearing kit includes bearing, circlip, and hub nut for a hassle-free installation.
- Precision-engineered to meet the performance requirements of SUV applications.
- Cross-referenced with major brands including SKF VKBA3951 and SNR R174.40 for easy part identification.
Installation Notes
- Verify your vehicle is a Honda CR-V II (RD5, RD6, RD7, RD8, RD9) or Honda Element model before ordering.
- This kit fits both front driver and passenger sides. Sold individually.
- Ensure the bearing is properly pressed onto the hub – apply pressure to the inner ring only.
- Replace the circlip and hub nut with those included in the kit. These are critical retaining components.
- Torque the hub nut to manufacturer specification (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and related components to OE specifications. Contact us
