Universal Joint 0180-25-060 For MITSUBISHI
The DUHUI Bearing 0180-25-060 universal joint is a direct-fit OE replacement designed for Mitsubishi Pajero models. This 20mm x 55mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 0180-25-060, 0437187501, and 41414120, this universal joint delivers reliable performance for compatible Mitsubishi applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 0180-25-060 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter (Cup) | 20.00 mm (0.787 inch) |
| Length | 55.00 mm (2.165 inch) |
| Vehicle Application | Mitsubishi Pajero |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
0180-25-060, 0437187501, 41414120
Reference Numbers (Interchange):
GMB: GUM-85
Matsuba: UJ605
KOYO: M46158
Vehicle Fitment
MITSUBISHI PAJERO I (L04_G, L14_G): 2.5 TD (L044G, L049G) 1989-1990
MITSUBISHI PAJERO I Canvas Top (L04_G): 2.3 TD (L043G, L048G) 1982-1986
MITSUBISHI PAJERO II (V3_W, V2_W, V4_W, V5_W): 2.8 TDi (V46W, V26W) 1994-1999
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi Pajero driveline applications. Matches OEM specifications 0180-25-060, 0437187501, and 41414120.
- 20.00 mm cup diameter and 55.00 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands high torque loads and angular misalignment common in 4WD applications.
Installation Notes
- Verify the 20.00 mm cup diameter matches your driveshaft yoke before installation.
- Check that the 55.00 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mitsubishi manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
