Universal Joint 3919-89-251 For DAIHATSU
The DUHUI Bearing 3919-89-251 universal joint is a direct-fit OE replacement designed for Daihatsu Feroza and Hijet models. This 22.5mm x 34.9mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 3919-89-251, 0437187503, and 0437187604, this universal joint delivers reliable performance for compatible Daihatsu applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 3919-89-251 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 22.50 mm (0.886 inch) |
| Length | 34.90 mm (1.374 inch) |
| Vehicle Application | Daihatsu Feroza, Hijet |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
3919-89-251, 0437187503, 0437187604
Reference Numbers (Interchange):
GMB: GUM-90
Matsuba: UJ610
Vehicle Fitment
DAIHATSU FEROZA Hard Top (F300): 1.6 i 16V 4×4 1988-1999
DAIHATSU HIJET Bus (S85): 1.0 1986-1989
DAIHATSU HIJET Van (S85): 1.0 i 1994-1998
DAIHATSU ROCKY / RUGGER: Compatible models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Daihatsu driveline applications. Matches OEM specifications including 3919-89-251, 0437187503, and 0437187604.
- 22.50 mm outside diameter and 34.90 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment.
Installation Notes
- Verify the 22.50 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 34.90 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Daihatsu manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
