Universal Joint 2158-25-060 For MAZDA
The DUHUI Bearing 2158-25-060 universal joint is a direct-fit OE replacement designed for Mazda 323, 626, and RX-7 models. This 25mm x 64mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 2158-25-060, 8BB1-25-060, and M00325060, this universal joint delivers reliable performance for compatible Mazda applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 2158-25-060 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 25.00 mm (0.984 inch) |
| Length | 64.00 mm (2.520 inch) |
| Vehicle Application | Mazda 323, 626, RX-7 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
2158-25-060, 8BB1-25-060, M00325060
Reference Numbers (Interchange):
GMB: GUM-83
Matsuba: UJ620
Vehicle Fitment
MAZDA 323 C IV (BG): 1.8 16V 4WD (BG8S) 1991-1993
MAZDA 626 III Station Wagon (GV): 2.2 12V 4WD (GV102) 1991-1992
MAZDA RX-7 I (SA): 1.0 (SA22C) 1979-1981
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda driveline applications. Matches OEM specifications including 2158-25-060, 8BB1-25-060, and M00325060.
- 25.00 mm outside diameter and 64.00 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment.
Installation Notes
- Verify the 25.00 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 64.00 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mazda manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
