Universal Joint 0604-89-251A For MAZDA
The DUHUI Bearing 0604-89-251A universal joint is a direct-fit OE replacement designed for Mazda B-Series pickup trucks. This 28mm x 80mm driveshaft u-joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 0604-89-251A, 0604-25-060, 8BW1-25-060, D27Z-4758A, and 2525-25-060, this universal joint delivers reliable performance for compatible Mazda truck applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 0604-89-251A |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 28.00 mm (1.102 inch) |
| Length | 80.00 mm (3.150 inch) |
| Vehicle Application | Mazda B-Series |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
0604-89-251A, 0604-25-060, 8BW1-25-060, D27Z-4758A, 2525-25-060
Reference Numbers (Interchange):
GMB: GUM-86
Matsuba: UJ630
Vehicle Fitment
MAZDA B-SERIES (UF): 2.0 1985-1996
MAZDA B-SERIES (UF): 2.2 B2200 D (UFY0) 1985-1996
MAZDA B-SERIES (UF): 2.6 4WD (UFY0) 1989-1991
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda B-Series driveline applications. Matches OEM specifications including 0604-89-251A, 0604-25-060, and 8BW1-25-060.
- 28.00 mm outside diameter and 80.00 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment common in truck applications.
Installation Notes
- Verify the 28.00 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 80.00 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mazda manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
