Universal Joint A9LY-4635 For IVECO
The DUHUI Bearing A9LY-4635 universal joint is a direct-fit OE replacement designed for Iveco Daily II and IV series vehicles. This 27mm x 81.7mm driveshaft cross joint transfers torque while accommodating angular changes between driveline components in commercial vehicle applications. Manufactured to match original equipment specifications including A9LY-4635, A9LY-4635-A, and 21C-7039, this universal joint delivers reliable performance for compatible Iveco Daily models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | A9LY-4635 |
| Product Type | Universal Joint / Cross Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 27.00 mm (1.063 inch) |
| Length | 81.70 mm (3.217 inch) |
| Vehicle Application | Iveco Daily II, IV |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
A9LY-4635, A9LY-4635-A, 21C-7039, 8MTH-7039, GP-18397, GPW-18379, 21C-18397-B, 211C11-18397, LD-44610-A, XL-512825
Reference Numbers (Interchange):
OE Replacement: A9LY-4635, A9LY-4635-A
Vehicle Fitment
IVECO DAILY II Bus: A 40-10 (95719111, 95719131, 95719311, 95719315) 1996-1999
IVECO DAILY II Van: 30-10 1997-1999
IVECO DAILY IV Platform/Chassis: 40C10 2006-2011
IVECO DAILY: Compatible models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Iveco Daily driveline applications. Matches OEM specifications including A9LY-4635, A9LY-4635-A, and 21C-7039.
- 27.00 mm outside diameter and 81.70 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment common in commercial vehicle applications.
Installation Notes
- Verify the 27.00 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 81.70 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Iveco manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
