Universal Joint 4123-4120 For MITSUBISHI
The DUHUI Bearing 4123-4120 universal joint is a direct-fit OE replacement designed for Mitsubishi Colt, L300, and L200 models. This 25mm x 63.8mm driveshaft cross joint transfers torque while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including 4123-4120, MB000345, MB000390, MD000392, and MST00024, this universal joint delivers reliable performance for compatible Mitsubishi applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 4123-4120 |
| Product Type | Universal Joint / Cross Joint |
| Application | Driveshaft / Propeller Shaft |
| Outside Diameter | 25.00 mm (0.984 inch) |
| Length | 63.80 mm (2.512 inch) |
| Vehicle Application | Mitsubishi Colt, L300, L200 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
4123-4120, MB000345, MB000390, MD000392, MST00024
Reference Numbers (Interchange):
GMB: GUM-82
Matsuba: UJ625
Vehicle Fitment
MITSUBISHI COLT IV (CA_A): 1.6 4WD (CC4A) 1993-1995
MITSUBISHI L300 / DELICA II Bus (LO3_P/G, L0_2P): 1.6 (L032P, L062P) 1984-1987
MITSUBISHI L200 (K7_T, K6_T, K5_T): 2.0 (K62T) 1996-2007
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi driveline applications. Matches OEM specifications including 4123-4120, MB000345, MB000390, MD000392, and MST00024.
- 25.00 mm outside diameter and 63.80 mm overall length provide exact fitment for the driveshaft yoke.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- Durable steel construction withstands torque loads and angular misalignment.
Installation Notes
- Verify the 25.00 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 63.80 mm overall length is correct for your application.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mitsubishi manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
