VKBA502 Wheel Bearing Kits For VOLVO
The DUHUI Bearing VKBA502 wheel bearing kit is an OE-replacement component for Volvo 340 and 360 series models equipped with front axle assemblies. This comprehensive front wheel bearing kit includes two bearings and grease, ensuring a complete front hub rebuild for classic Volvo applications. Manufactured to match original equipment specifications including VKBA502, R163.00, 713660110, 273747, and 2737476, this kit delivers reliable performance for compatible Volvo vehicles.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | VKBA502 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Front |
| Inside Diameter | 40.00 mm (1.575 inch) |
| Outside Diameter | 68.00 mm (2.677 inch) |
| Width | 34.00 mm (1.339 inch) |
| Kit Contents | 2 Bearings, 1 Grease |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
VKBA502, R163.00, 713660110, 273747, 2737476
Reference Numbers (Interchange):
SKF: VKBA502
SNR: R163.00
Vehicle Fitment
VOLVO 340-360 (343, 345): 1.3 1989-1990
Additional compatible models (verify before ordering):
VOLVO: 340/360 1984-1991 (1.4L, 1.6L, 1.7L, 2.0L), 240 1984-1993, 740 1984-1992
Engine Compatibility: 1.3L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes two bearings and grease for a full hub rebuild.
- 40 mm inside diameter and 68 mm outside diameter provide exact fitment for Volvo 340-360 front axle assemblies.
- Designed specifically for Volvo 340-360 series and compatible classic Volvo models.
- Comprehensive kit format simplifies maintenance and restoration of classic vehicles.
- Kit includes pre-measured grease for proper bearing lubrication.
Installation Notes
- Verify the 40 mm inside diameter, 68 mm outside diameter, and 34 mm width match your original bearing before installation.
- This kit is designed for front axle fitment on Volvo 340-360 models.
- Inspect the hub surface and axle shaft for damage or wear before installing new components.
- Use the included grease to properly lubricate both bearings before installation.
- Torque the hub nut to manufacturer specifications (refer to the Volvo 340-360 service manual).
- After installation, check for smooth rotation and proper seating of the bearings.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
