Tensioner FC0115980 For Mazda
The DUHUI Bearing FC0115980 belt tensioner is an OE-spec replacement component for the accessory drive belt system on select Mazda and Ford models. This automatic spring-loaded tensioner maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including FC01-15-980 and FC0115980, this unit delivers reliable performance for a broad range of Mazda and Ford vehicles.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK1106 |
| Part Number | FC0115980 |
| Product Type | Belt Tensioner / Automatic Drive Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1106
OE Numbers: FC01-15-980, FC0115980, FC01-15980, 6E5Q-6A228-BD
Reference Numbers (Interchange):
TNF: LZ-7538
Mazda: PE03-15-980C, PE01-15-980A, PE01-15-980B
Ford: L32115980A
TRQ: BPA03837
Vehicle Fitment
This accessory drive belt tensioner is compatible with a wide range of Mazda and Ford models equipped with MZR and Duratec engines:
MAZDA: 3 (2004-2021), 6 (2002-2021), CX-3 (2016-2022), CX-5 (2013-2025), CX-7 (2008 2.3L), CX-9 (2016-2023), CX-30 (2020-2025), MX-5 Miata (2016-2025)
FORD: Escape (2005-2012)
BESTUNE / CHINA: X80, B70, B90, H7 (A151 and 2.0/2.3L applications)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mazda and Ford applications with FC01-15-980 / FC0115980.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including TNF LZ-7538 and TRQ BPA03837 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the belt stretches over time.
- OE-compatible replacement for original part numbers FC01-15-980, FC0115980, and PE03-15-980C.
Installation Notes
- This tensioner is designed for the accessory drive belt system on Mazda and Ford models equipped with MZR 2.0L, 2.3L, 2.5L and compatible engines.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve spring tension – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tensioner pulleys and wheel bearing assemblies to OE specifications. Contact us
