Tensioner Tension Pulley 022145276A For Audi
The DUHUI Bearing 022145276A drive belt tensioner pulley is an OE-spec replacement component for the accessory drive belt system on a wide range of Audi, Porsche, and Volkswagen SUV models. This smooth-surface idler/tensioner pulley maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 022145276A and 95510227600, this unit delivers reliable performance for premium SUV applications .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 022145276A |
| Outer Diameter | 60.00 mm (2.362 inch) |
| Height | 28.00 mm (1.102 inch) |
| Bearing Bore Diameter | 17.00 mm (0.669 inch) |
| Material | Thermoplastic / Steel |
| Product Type | Idler Pulley / Tensioner Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 022145276A, 022145276E, 95510227600, 95510211900
Reference Numbers (Interchange):
INA: 532055510
GATES: 36384
CONTINENTAL: 50020
DAYCO: 89530
FEBI BILSTEIN: 47939
OPTIMAL: 0-N2110
SKF: VKM31317
SNR: GA35748
VAICO: V10-1780
RUVILLE: 56325
Vehicle Fitment
This drive belt tensioner pulley is compatible with a wide range of Audi, Porsche, and Volkswagen models equipped with 3.2L, 3.6L, and 4.2L engines:
AUDI Q7 (4L): 3.6 FSI (BHK, BHL) 2006-2016, 4.2 FSI 2006-2016
PORSCHE CAYENNE (9PA): 3.2 2003-2006, 3.6 2003-2006
VOLKSWAGEN TOUAREG (7L): 3.2 V6 2002-2006, 3.6 V6 FSI 2006-2010
VOLKSWAGEN PHAETON: 3.6 V6 4motion 2006-2009
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Audi, Porsche, and VW applications with 022145276A / 95510227600.
- Designed for accessory drive belt (serpentine belt) guidance and tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including INA 532055510 and GATES 36384 for easy interchangeability in the aftermarket .
- Precision-engineered with premium sealed bearing to protect from contaminants and ensure long service life .
- OE-compatible replacement for original part numbers 022145276A and 022145276E.
Installation Notes
- This pulley is designed for the accessory drive belt system on Audi Q7, Porsche Cayenne, and VW Touareg models.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve tension – never cut or pry the belt off while under tension.
- When replacing the pulley, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolt to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tensioner pulleys and wheel bearing assemblies to OE specifications. Contact us
