Tensioner 06H903133G For Audi
The DUHUI Bearing 06H903133G drive belt tensioner is an OE-spec replacement component for the accessory drive belt system on a wide range of Audi and Volkswagen models equipped with 2.0 TFSI engines. This automatic spring-loaded tensioner maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 06H903133G and 06H903133F, this unit is a critical component for the EA888 engine platform.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 06H903133G |
| Outer Diameter | 70.00 mm (2.756 inch) |
| Height | 24.00 mm (0.945 inch) |
| Product Type | Belt Tensioner / Automatic Drive Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 06H903133G, 06H903133F, 06H 903 133 F
Reference Numbers (Interchange):
INA: VKM31310, 534033310
CONTINENTAL: V-3569
GATES: 38181
DAYCO: 89649
SKF: VKM31310
FEBI BILSTEIN: 30702
RUVILLE: 55112
TRQ: BPA04182
Vehicle Fitment
This drive belt tensioner is compatible with Audi and Volkswagen models equipped with 2.0 TFSI engines (engine codes CDNC, CESA, CETA, CAEB, CDNB):
AUDI A4 (8K2, B8): 2.0 TFSI 2007-2015
AUDI A5 (8T): 2.0 TFSI 2007-2016
AUDI Q5 (8R): 2.0 TFSI 2008-2017
AUDI A6 (C7): 2.0 TFSI 2011-2018
AUDI A3 (8P, 8V): 2.0 TFSI 2008-2018
VOLKSWAGEN PASSAT (B7): 2.0 TFSI 2010-2015
VOLKSWAGEN TIGUAN: 2.0 TFSI 2008-2017
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Audi and VW applications with 06H903133G / 06H903133F.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including INA VKM31310, GATES 38181, and CONTINENTAL V-3569 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the belt stretches over time.
- OE-compatible replacement for original part numbers 06H903133G and 06H903133F.
Installation Notes
- This tensioner is designed for the accessory drive belt system on Audi and VW models equipped with the 2.0 TFSI engine.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve spring tension – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces drive belt tensioners and wheel bearing assemblies to OE specifications. Contact us
