Wheel Bearing DAC34640037-2RS
The DUHUI Bearing DAC34640037-2RS double-row wheel bearing is an OE-replacement solution for the Opel Ascona C (J82) 1.3 N from 1981 to 1986 and the Daewoo Cielo 1.5 from 1994 to 1998. This double-row angular contact ball bearing features rubber seals on both sides (2RS) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including BCA 510066, this wheel bearing delivers dependable performance for compatible GM-derived vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0016 | |
| Part Number | DAC34640037-2RS | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 34.00 mm | 1.339 in |
| Outer Diameter | 64.00 mm | 2.520 in |
| Width | 37.00 mm | 1.457 in |
| Seal Type | 2RS (Double Rubber Seal) | |
| Weight | 0.42 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0016
OE Numbers:
DAC34640037-2RS, 510066
Reference Numbers (Interchange):
BCA: 510066
SKF: VKBA1364
FAG: 713613230
Vehicle Fitment
OPEL ASCONA C (J82): 1.3 N (F11, M11, F69) 1981-1986
DAEWOO CIELO: 1.5 1994-1998
Additional compatible models (verify before ordering):
OPEL: Ascona C 1.6, 1.8 (1981-1988), Kadett E (1984-1991), Vectra A (1988-1995)
DAEWOO: Cielo 1.5, 1.6 (1993-1999), Lanos (1997-2002), Nubira (1997-2002)
Engine Compatibility: 13 N 1.3L (44 kW / 60 hp); V15L 1.5L (66 kW / 90 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RS rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 510066, SKF VKBA1364, and FAG 713613230.
Installation Notes
- Confirm inner diameter is 34.00 mm (1.339 in), outer diameter is 64.00 mm (2.520 in), and width is 37.00 mm (1.457 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the vehicle service manual).
- Verify fitment for your specific Opel or Daewoo model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
