Tensioner Tension Pulley 038109244M For Seat
The DUHUI Bearing 038109244M timing belt idler pulley is an OE-spec replacement component for the timing belt system on a wide range of Volkswagen Group models equipped with 1.9 TDI diesel engines. This guide pulley ensures proper timing belt routing and maintains correct belt tension, ensuring accurate valve and piston synchronization for reliable engine operation. Manufactured to match original equipment specifications including 038109244M and 038109244C, this unit is a critical component for timing belt replacement service on the VW Group EA188 engine family.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 038109244M |
| Outer Diameter | 80.00 mm (3.150 inch) |
| Width | 29.00 mm (1.142 inch) |
| Inner Diameter (Bore) | 10.00 mm (0.394 inch) |
| Product Type | Timing Belt Idler Pulley / Guide Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 038109244M, 038109244B, 038109244H, 038109244C
Reference Numbers (Interchange):
INA: VKM21130
GATES: T42050
SKF: VKM21130
FEBI BILSTEIN: 24754
BREDA LORETT: CR3628
Vehicle Fitment
This timing belt idler pulley is designed for VW Group models equipped with 1.9 TDI diesel engines:
SEAT CORDOBA (6K5): 1.9 TDI 1999-2002
SEAT IBIZA (6K): 1.9 TDI 1999-2002
SEAT TOLEDO (1M2): 1.9 TDI 1999-2004
VOLKSWAGEN BORA (1J2): 1.9 TDI 1998-2005
VOLKSWAGEN GOLF IV (1J1): 1.9 TDI 1997-2003
VOLKSWAGEN PASSAT (3B): 1.9 TDI 1996-2005
AUDI A3 (8L): 1.9 TDI 1998-2003
ŠKODA OCTAVIA I: 1.9 TDI 1998-2004
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 038109244M / 038109244B.
- Precision-engineered guide pulley for timing belt systems on 1.9 TDI diesel engines.
- Cross-references with multiple leading brands including INA VKM21130 and GATES T42050 for easy interchangeability in the aftermarket.
- Premium sealed bearing protects from contaminants and ensures long service life.
- OE-compatible replacement for original part numbers 038109244M, 038109244B, 038109244H, and 038109244C.
Installation Notes
- This idler pulley is designed for the timing belt system on VW Group models equipped with 1.9 TDI diesel engines.
- When replacing the idler pulley, it is highly recommended to replace the timing belt, tensioner, and water pump as well – timing belt failure can cause serious damage to valves and pistons on these interference engines.
- Before removal, locate the OE belt routing diagram or make a sketch of the belt path.
- Use appropriate tools to safely relieve tension – never cut or pry the belt off while under tension.
- Ensure the mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolt to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, rotate the engine by hand to verify proper belt tension and alignment, then start the engine briefly and recheck.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces timing belt idler pulleys, tensioner pulleys, and wheel bearing assemblies to OE specifications. Contact us
