Tensioner 58260511 For Audi
The DUHUI Bearing 58260511 drive belt tensioner is an OE-spec replacement component for the accessory drive belt system on a wide range of Audi and Volkswagen models equipped with 1.8T 20V engines. This automatic spring-loaded tensioner maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 58260511 and 058260511, this unit delivers reliable performance for the EA113 engine family.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 58260511 |
| Outer Diameter | 59.80 mm (2.354 inch) |
| Width | 19.00 mm (0.748 inch) |
| Product Type | Belt Tensioner / Automatic Drive Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 58260511, 058260511, 06B903315A
Reference Numbers (Interchange):
INA: 531030910
SKF: VKM31001
GATES: T38152
FEBI BILSTEIN: 30686
RUVILLE: 55108
Vehicle Fitment
AUDI A4 (8D2, B5): 1.8T 1994-2001
AUDI A4 (B5): 1.8T Quattro 1997-2001
AUDI A6 (C5): 1.8T 1997-2005
AUDI TT (8N): 1.8T 1998-2006
AUDI A3 (8L): 1.8T 1998-2003
VOLKSWAGEN PASSAT (3B): 1.8T 1996-2005
VOLKSWAGEN GOLF IV (1J): 1.8T 1997-2003
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 58260511 / 058260511.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including INA 531030910 and SKF VKM31001 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the belt stretches over time.
- OE-compatible replacement for original part numbers 58260511 and 06B903315A.
Installation Notes
- This tensioner is designed for the accessory drive belt system on VW Group models equipped with 1.8T engines.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve spring tension – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces drive belt tensioners and wheel bearing assemblies to OE specifications. Contact us
