Tensioner 06C109244C For Audi
The DUHUI Bearing 06C109244C timing belt idler pulley is an OE-spec replacement component for the timing belt system on select Audi models equipped with the 3.0L V6 engine. This idler pulley ensures proper timing belt routing and maintains correct belt tension, ensuring accurate valve and piston synchronization for reliable engine operation. Manufactured to match original equipment specifications including 06C109244C, this unit is a critical component for timing belt replacement service on the Audi 3.0L V6 engine family.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 06C109244C |
| Outer Diameter | 59.00 mm (2.323 inch) |
| Inner Diameter (Bore) | 10.20 mm (0.402 inch) |
| Width | 37.50 mm (1.476 inch) |
| Product Type | Timing Belt Idler Pulley / Guide Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 06C109244C
Reference Numbers (Interchange):
INA: 531 0566 10
GATES: T42050
SKF: VKM21006
FEBI BILSTEIN: 20965
Vehicle Fitment
AUDI A4 (B6, 8E2): 3.0 V6 2000-2005
AUDI A4 (B7, 8EC): 3.0 V6 2004-2008
AUDI A6 (C5, 4B): 3.0 V6 2000-2004
AUDI A8 (D2, 4D): 3.0 V6 2000-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Audi applications with 06C109244C.
- Precision-engineered idler pulley for the Audi 3.0L V6 timing belt system.
- Cross-references with multiple leading brands including INA 531056610 and GATES T42050 for easy interchangeability in the aftermarket.
- Premium sealed bearing protects from contaminants and ensures long service life.
- OE-compatible replacement for original part number 06C109244C.
Installation Notes
- This idler pulley is designed for the timing belt system on Audi models equipped with the 3.0L V6 engine.
- When replacing the idler pulley, it is highly recommended to replace the timing belt, tensioner, and water pump as well – these are interference engines and timing belt failure can cause serious damage to valves and pistons.
- Before removal, locate the OE belt routing diagram or make a sketch of the belt path.
- Use appropriate tools to safely relieve tension – never cut or pry the belt off while under tension.
- Ensure the mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolt to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, rotate the engine by hand to verify proper belt tension and alignment, then start the engine briefly and recheck.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces timing belt idler pulleys, tensioner pulleys, and wheel bearing assemblies to OE specifications. Contact us
