Tensioner 026109243E For Audi Volkswagen
The DUHUI Bearing 026109243E timing belt tensioner is a direct OE-replacement component for the timing belt system on select Audi and Volkswagen models equipped with 1.8L and 1.5L petrol engines. This tensioner maintains proper timing belt tension, ensuring accurate valve and piston synchronization and preventing catastrophic engine damage if belt failure occurs. Manufactured to match original equipment specifications including 026109243E, 026109243F, and 026109243, this unit is a critical component for timing belt replacement service on classic VW Group applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 026109243E |
| Outer Diameter | 70.00 mm (2.756 inch) |
| Width | 20.40 mm (0.803 inch) |
| Product Type | Timing Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 026109243E, 026109243F, 026109243, 026109243A, 026109243G, 026109243L
Reference Numbers (Interchange):
INA: 531 0171 10
GATES: T42051
SKF: VKM21006
Vehicle Fitment
AUDI 100 AVANT (445, 446): 1.8 quattro 1983-1990
AUDI 100 (C3): 1.8 1983-1990
AUDI 80 (B2, B3): 1.8 1983-1991
VOLKSWAGEN CADDY I (14): 1.5 1980-1985
VOLKSWAGEN GOLF I (17): 1.5 1978-1983
VOLKSWAGEN JETTA I (16): 1.5 1978-1983
VOLKSWAGEN PASSAT (B2): 1.5 1980-1984
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 026109243E / 026109243F.
- Designed for timing belt tensioning on 1.8L and 1.5L engines, maintaining proper belt tension to ensure accurate valve and piston synchronization.
- Cross-references with multiple leading brands including INA 531017110 and GATES T42051 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the timing belt stretches over time.
- OE-compatible replacement for original part numbers 026109243E, 026109243F, 026109243, 026109243A, 026109243G, and 026109243L.
Installation Notes
- This tensioner is designed for the timing belt system on classic VW Group models equipped with 1.8L and 1.5L engines.
- When replacing the tensioner, it is highly recommended to replace the timing belt and water pump as well – these are interference engines and timing belt failure can cause serious damage to valves and pistons.
- Before removal, locate the OE belt routing diagram or make a sketch of the belt path.
- Use appropriate tools to safely relieve spring tension – never cut or pry the belt off while under tension.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- After installation, rotate the engine by hand to verify proper belt tension and alignment, then start the engine briefly and recheck.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces timing belt tensioners, idler pulleys, and wheel bearing assemblies to OE specifications. Contact us
