UC317 Insert Spherical Bearing
The DUHUI Bearing UC317 insert spherical bearing is an OE-spec replacement component for heavy-duty industrial, agricultural, and material handling equipment. This wide inner ring ball bearing features a spherical outer diameter for self-alignment in mounted bearing assemblies, compensating for shaft misalignment in demanding applications. Manufactured to match original equipment specifications including UC317, this unit delivers reliable performance for heavy-duty mounted bearing applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK112 |
| Part Number | UC317 |
| Bore Diameter (d) | 85.00 mm (3.346 inch) |
| Outside Diameter (DSP) | 180.00 mm (7.087 inch) |
| Width (B) | 96.00 mm (3.780 inch) |
| Outer Ring Width (C) | 46.00 mm (1.811 inch) |
| Distance Raceway (S) | 40.00 mm (1.575 inch) |
| Grease Fitting (g) | 56.00 mm (2.205 inch) |
| Grease Fitting Thread (ds) | M16×1.5 |
| Dynamic Load Rating (Cr) | 133,000 N (29,898 lbf) |
| Static Load Rating (C0r) | 96,000 N (21,581 lbf) |
| Locking Type | Set Screw (2 Screws) |
| Seal Type | Double Sealed (RSR on both sides) |
| Weight | 5.20 kg (11.46 lb) |
| Temperature Range | -20 to 100 °C (-4 to 212 °F) |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK112
OE Numbers: UC317, UC317E
Reference Numbers (Interchange):
Timken: UC317
SKF: UC317
FYH: UC317
AMI Bearings: UC317
TRITAN: UC317
SNR: UC317G2T04
Product Features
- Wide inner ring design provides effective shaft support for heavy-duty industrial applications.
- Spherical outer diameter compensates for shaft misalignment in mounted bearing housings.
- Set screw locking mechanism secures the bearing to the shaft, ideal for reversing load applications.
- Double RSR seals on both sides protect against contaminants and retain lubricant.
- Relubricatable via M16×1.5 lubrication hole with grease fitting for extended service life.
- Premium chrome steel construction with super-finished raceways and grade 10 balls for smooth, low-noise operation under heavy loads.
Installation Notes
- This insert bearing is designed for use in customer-supplied housings with corresponding spherical inside surfaces.
- Before installation, clean the shaft and housing bore thoroughly and inspect for damage or wear.
- Tighten set screws to the manufacturer’s specified torque – over-tightening can distort the bearing inner ring.
- Relubricate through the M16×1.5 grease fitting after installation to ensure proper lubrication.
- We recommend professional installation to verify fitment and ensure correct shaft alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces insert spherical bearings, wheel bearing kits, and hub assemblies to OE specifications. Contact us
