VKBA3441 Wheel Bearing Kits For SKODA
The DUHUI Bearing VKBA3441 front wheel bearing kit is an OE-spec replacement solution for Škoda Felicia, Favorit, and related models. This comprehensive kit includes the bearing, nut, and circlip for a complete front hub service. Manufactured to match original equipment specifications including SKF VKBA3441, FAG 713614030, and 969106800, this kit delivers reliable performance for Škoda compact car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK272 |
| Part Number | VKBA3441 |
| Inner Diameter | 35.00 mm (1.378 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 37.00 mm (1.457 inch) |
| Fitting Position | Front Axle |
| Kit Contents | 1 Bearing, 1 Nut, 1 Circlip |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK272
OE Numbers: 6U0407625A, 969106800, PLC1512
Reference Numbers (Interchange):
SKF: VKBA3441
FAG: 713614030
BRT BEARINGS: PWK1514
NIPPARTS: J4718016
Vehicle Fitment
ŠKODA FELICIA I (6U1, 6U5, 6UF, 6U7): 1.3 1994-2001, 1.6 1994-2001, 1.9 D 1997-2002
ŠKODA FAVORIT (787): 1.3 1992-1997
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit with bearing, nut, and circlip included for a single-source replacement solution.
- Precision-machined to match OE dimensions: 35mm inner diameter, 72mm outer diameter, and 37mm width, ensuring proper fitment on front axle applications.
- Designed specifically for Škoda Felicia and Favorit models.
- Cross-references with multiple leading brands including SKF VKBA3441 and FAG 713614030 for easy interchangeability in the aftermarket.
- OE-compatible replacement for Škoda part numbers 6U0407625A and 969106800.
Installation Notes
- This kit is designed for front axle fitment on Škoda Felicia and Favorit models. Verify positioning before installation.
- Clean the hub and axle shaft surfaces thoroughly before installation to ensure proper bearing seating and prevent premature wear.
- Ensure the circlip is properly seated in its groove to secure the bearing in place.
- Torque the hub retaining nut to Škoda factory specifications; over-tightening can damage the bearing.
- We recommend professional installation to ensure correct bearing preload and to verify fitment against original components.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and hub assemblies to OE specifications. Contact us
