VKBA1961 Wheel Bearing Kits For MITSUBISHI
The DUHUI Bearing VKBA1961 wheel bearing kit is an OE-replacement solution for selected Mitsubishi models including Colt III and Lancer IV. This comprehensive kit includes two bearings, an oil seal, a mounting nut, and grease, ensuring a complete rear hub rebuild. Manufactured to match original equipment specifications including VKBA1961, R173.13, and 713619260, this wheel bearing kit delivers reliable performance for compatible Mitsubishi vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DBK143 | |
| Part Number | VKBA1961 | |
| Product Type | Wheel Bearing Kit | |
| Fitting Position | Rear Axle | |
| Kit Contents | 2 Bearings, 1 Oil Seal, 1 Nut, 1 Grease | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK143
OE Numbers:
R173.13, 713619260, 5272024000, 5272024100, 5272024210, 5272024310, MB515471, 7313, 26882
Reference Numbers (Interchange):
SKF: VKBA1961
SNR: R173.13
FAG: 713619260
FEBEST: 1324-1961
QUINTON HAZELL: QWB948
Vehicle Fitment
MITSUBISHI COLT III (C5_A): 1.3 GL (C61A) 1988-1990
MITSUBISHI LANCER IV Hatchback (C6_A, C7_A): 1.6 16V (C76A, C66A) 1992-1994
Additional compatible models (verify before ordering):
MITSUBISHI: Colt III 1.5 (1988-1990), Lancer IV 1.3 (1992-1994), Lancer IV 1.5 (1992-1994)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes two bearings, oil seal, mounting nut, and grease for a full hub rebuild.
- Designed specifically for Mitsubishi Colt III, Lancer IV, and compatible models.
- Dual bearing configuration provides enhanced load distribution and stability.
- Kit format simplifies maintenance and reduces downtime.
- Included grease and oil seal ensure proper lubrication and contamination protection.
Installation Notes
- This kit is designed for rear axle fitment on Mitsubishi Colt III, Lancer IV, and compatible models.
- Verify the kit contents match your original bearing before installation.
- Inspect the hub surface and axle shaft for damage or wear before installing new components.
- Pack both bearings with the included grease before installation.
- Ensure the oil seal is correctly installed to prevent leakage and contamination.
- Torque the mounting nut to manufacturer specifications (refer to the vehicle service manual).
- Check wheel bearing play after installation to ensure proper adjustment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
