Wheel Bearing Kits VKBA1910 For Isuzu
The DUHUI Bearing VKBA1910 wheel bearing kit is a front axle replacement kit designed for Isuzu Midi (94000, 98000) commercial vehicles. This comprehensive kit includes two bearings, one oil seal, and one split pin, providing all components needed for a complete front wheel bearing replacement. The kit matches OE specifications including 931669, with cross-references to SKF VKBA1910, BRT1191, and NIPPARTS J4709005.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK130 |
| Part Number | VKBA1910 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Front Axle |
| Kit Contents | 2 Bearings, 1 Oil Seal, 1 Split Pin |
| Inner Diameter 1 | 21.43 mm (0.844 inch) |
| Outer Diameter 1 | 50.00 mm (1.969 inch) |
| Width 1 | 17.53 mm (0.690 inch) |
| Inner Diameter 2 | 34.98 mm (1.377 inch) |
| Outer Diameter 2 | 65.08 mm (2.562 inch) |
| Width 2 | 18.03 mm (0.710 inch) |
| Bearing Type | Tapered Roller Bearings |
| Weight | 0.46 kg (1.01 lb) |
Note: Dimensional data is based on PRORUN and RUVILLE published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK130
OE Numbers:
931669, J4709005
Reference Numbers (Interchange):
SKF: VKBA1910
BRT: BRT1191
NIPPARTS: J4709005
AUTOKIT: 01.97128
OPTIMAL: 931669
Vehicle Fitment
ISUZU MIDI Van (94000, 98000): 2.2 D 4WD (94000) 1988-1992
Engine: 4FD1 2.2 L diesel, 61 HP
ISUZU WFR: Compatible models (verify before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes two tapered roller bearings, one oil seal, and one split pin – all components needed for a full hub rebuild on Isuzu Midi models.
- Designed specifically for Isuzu Midi (94000, 98000) front axle applications – verified fitment for 1988-1992 model years with 4WD configuration.
- Cross-referenced with SKF VKBA1910, BRT1191, and NIPPARTS J4709005 – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
- Precision-engineered tapered roller bearings with heat-treated steel construction deliver reliable performance and long service life in commercial vehicle applications.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm fitment for Isuzu Midi front axle.
- This kit is designed for front axle fitment on Isuzu Midi 4WD models – confirm placement and drive configuration before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Replace the included oil seal during installation to prevent lubricant leakage and contamination.
- Use the supplied split pin to secure the axle nut after torquing to manufacturer specifications.
- Pack the bearings with high-quality wheel bearing grease before installation and torque all fasteners to Isuzu service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
