Wheel Bearing Kits VKBA6923 For Hyundai
The DUHUI Bearing VKBA6923 wheel bearing kit is a front axle replacement kit designed for Hyundai Veloster (FS) and compatible Hyundai Elantra (MD/UD), Kia Forte (YD), and Kia Soul (AM/PS) models. This comprehensive kit includes the bearing, a circlip, and a split pin, providing all components needed for a complete front wheel bearing replacement. It matches OE specifications including 51720-0Q000, 51720-2H000, and 51720-2K000, with cross-references to SKF VKBA6923 and SNR R184.26.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK834 |
| Part Number | VKBA6923 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Front Axle (Left/Right) |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Split Pin |
| Material | GCr15 Bearing Steel |
Note: Dimensional data based on SKF and SNR published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK834
OE Numbers:
51720-0Q000, 51718-2H000, 51720-2H000, 51720-2K000, 51755-1H000
Reference Numbers (Interchange):
SKF: VKBA6923
SNR: R184.26
FAG: 713626560
SPIDAN: 27765
NIPPARTS: N4700515
AUTOKIT: 01.98689
GSP: 9229005K
A.B.S.: 201543
OPTIMAL: 922116
Vehicle Fitment
HYUNDAI VELOSTER (FS): 1.6 GDI, 1.6 T-GDI 2011-2017
HYUNDAI ELANTRA (MD/UD): 1.6, 1.8, 2.0, 1.6 CRDi 2011-2026
HYUNDAI i30 (GD): Various models
KIA FORTE (YD): 2013-2026
KIA SOUL (AM/PS): 2014-2025
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, and split pin – all components needed for a full front hub rebuild on compatible Hyundai and Kia models.
- Designed specifically for Hyundai Veloster, Elantra, i30 and Kia Forte, Soul front axle applications – verified fitment for 2011-2026 model years.
- Cross-referenced with SKF VKBA6923, SNR R184.26, and FAG 713626560 – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
- Constructed from high-grade GCr15 bearing steel for superior load-bearing capacity and service life.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm fitment for compatible Hyundai and Kia front axle.
- This kit is designed for front axle fitment on compatible Hyundai and Kia models – confirm placement before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Ensure the supplied circlip is properly seated in its groove after bearing installation.
- Use the supplied split pin to secure the axle nut after torquing to manufacturer specifications.
- Torque all fasteners to Hyundai/Kia service manual specifications for the respective chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
