Wheel Bearing Kits VKBA6813 For Hyundai
The DUHUI Bearing VKBA6813 wheel bearing kit is a rear axle hub assembly designed for the Hyundai Tiburon (GK) without ABS . This comprehensive kit includes a pre-assembled hub unit with securing nut, providing a complete solution for rear wheel bearing replacement. It matches OE specifications including 52710-2C000, 52710-2C100, 52710-2C101, and 52710-2C205, with cross-references to SKF VKBA6813 and SNR R184.23 .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK768 |
| Part Number | VKBA6813 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Rear Axle (Left/Right) |
| Kit Contents | 1 Hub Unit with Bearing, 1 Nut |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Wheel Stud Quantity | 4 |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| ABS Sensor Ring | Not Included (Non-ABS Model) |
| Material | GCr15 Bearing Steel |
| Weight | 2.78 kg (6.13 lb) |
Note: Dimensional data is based on SKF and SNR published specifications .
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK768
OE Numbers:
52710-2C000, 52710-2C100, 52710-2C101, 52710-2C205
Reference Numbers (Interchange):
SKF: VKBA6813
SNR: R184.23
FAG: 713626660
MOOG: HY-WB-11836
A.B.S.: 201347
GSP: 9232024K
Vehicle Fitment
HYUNDAI TIBURON (GK): 2003-2008 – Models Without ABS
HYUNDAI TIBURON (GK): 2.0, 2.7 V6 2003-2008
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes a pre-assembled hub unit with bearing and securing nut – all components needed for a full hub replacement on Hyundai Tiburon models.
- Designed specifically for Hyundai Tiburon (GK) rear axle applications without ABS – verified fitment for 2003-2008 model years.
- 4-bolt flange configuration with 139 mm flange diameter and 114.3 mm bolt circle matches OE specifications for direct fitment.
- Pre-greased and pre-assembled hub unit simplifies installation, requiring no shims or complex adjustments.
- Cross-referenced with SKF VKBA6813, SNR R184.23, and FAG 713626660 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm flange diameter (139 mm) and 4-bolt configuration.
- This kit is designed for non-ABS Hyundai Tiburon models – do not use on vehicles equipped with ABS.
- The hub assembly is pre-assembled with integrated bearing – handle with care to avoid contamination or damage to the bearing surfaces.
- Inspect the axle shaft and hub surface for wear or damage before installing new components.
- Torque the securing nut and wheel bolts to Hyundai service manual specifications for the GK chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
